593802

Lorus VD57 Manual

1
Zoom out
Zoom in
Previous page
1/2
Next page
CAL. VD57 (RM3 SERIES)
CAL. V657(RJN SERIES)
8-2010
■ CHARACTERISTICS
1. Time: Indicated by the hour, minute and
second hands.
2. Date: Displayed in numerals.
3. Stopwatch: Measures up to 60 minutes in
1/10 second increments.
•Split time measurement
■ DISPLAY AND CROWN OPERATION
Stopwatch second hand
B
A
Crown
Date
Second
click
First
click
Normal
position
Stopwatch
1/10-second hand
Stopwatch
minute
hand
Hour hand
Second
hand
Crown :
Normal position :Free
First click :Setting the date
Second click :•Setting the time
• Adjusting the stopwatch hand
position
■ ADJUSTING THE STOPWATCH HAND
POSITION
Before setting the time, be sure to check if the
stopwatch hands are in the “0” position when
the stopwatch is reset.
• If the stopwatch is in use, press the buttons
in the following order to reset it.
• If the stopwatch is counting : A ➡ B
• If the stopwatch is stopped : B
• If the split time is displayed : B ➡ A ➡ B
• If any of the stopwatch hands do not return
to the “0” position when the stopwatch is
reset, follow the procedure below to reset
the hands.
1. Pull out the crown all the way.
2. Press “A” repeatedly to reset the stopwatch
1/10-second hand to the “0” position.
Press “B” repeatedly to reset the stopwatch
second and minute hands to the “0” position.
* The hands move quickly if the respective
buttons are kept pressed.
3. Push the crown back into the normal position.
■ HOW TO SET THE TIME/CALENDAR
• If the stopwatch is in use, be sure to reset it
before setting the time.
1. Pull out the crown to the first click.
2. Turn the crown clockwise until the previous
day’s date appears.
3. Pull out the crown to the second click when
the second hand is at the 12 o’clock position.
The second hand will stop on the spot.
4. Turn the crown clockwise until the desired
date appears, and set the hour and minute
hands to the desired time.
5. Push the crown back into the normal position
in accordance with a time signal.
Notes:
1. While the crown is at the second click, do
not press any button. Otherwise, the
stopwatch hands will move.
* To reset them to the “0” position, refer to
“ADJUSTING THE STOPWATCH HAND
POSITION”.
2. Do not set the date between 9:00 p.m. and
1:00 a.m. Otherwise, the date may not
change properly.
* If it is necessary to set the date during that
time period, first change the time to any time
outside it, set the date and then reset the
correct time.
3. When setting the hour hand, be sure to check
that AM/PM is correctly set. The watch is so
designed that the date changes once in 24
hours.
4. When setting the minute hand, first advance
it 4 to 5 minutes ahead of the desired time
and then turn it back to the exact minute.
• The stopwatch can measure up to 60 minutes
in 1/10 second increments.
• The measured time is indicated by the small
stopwatch hands that move independently
of the center hands.
■ HOW TO USE THE STOPWATCH
✩ After the measurement exceeds 1 minute,
the stopwatch 1/10-second hand stays at the
“0” position.
When the measurement is stopped, it will
move to indicate the elapsed 1/10 seconds.
Stopwatch operation
Start Stop Reset
Second
click
Stopwatch
minute
hand
Stopwatch 1/10-second hand
Crown
Stopwatch second hand
Second hand
Minute hand
Crown
Second click
First click
Date
Hour hand
Stopwatch 1/10-second hand
Stopwatch second
hand
Stopwatch
minute
hand
Minute hand
A
B
A
B
Standard measurement
A
B
A
✩
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus VD57 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus VD57 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lorus VD57

Lorus VD57 User Manual - German - 16 pages

Lorus VD57 User Manual - Dutch - 16 pages

Lorus VD57 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info