593766

Lorus V072 Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
If all the three buttons pressed at the same
time, the digital display as shown below will
appear. This is not a malfunction. Press any
one of the three buttons to return to the display
previously shown.
■ NOTE ON UNUSUAL DISPLAY
[All the segments lighting up]
Notes:
1. When setting the alarm in the 12-hour
indication, check that AM/PM is properly
set. Only “PM” mark is displayed. For the
AM setting, there is no indication.
2. When the time function is displayed in the
24-hour indication, the alarm will also be
displayed in the 24-hour indication.
3. If the watch is left untouched in the ALARM
SETTING display with the digits flashing, it will
automatically return to the ALARM mode
in 1 to 2 minutes.
Engagement/disengagement of the alarm
• With each press of button “A” in the
ALARM mode, the alarm is engaged and
disengaged alternately.
When the alarm is engaged, the alarm
mark appears. When it is disengaged, the
mark disappears.
• At the designated time, the alarm rings for
20 seconds.
To stop it manually, press any of the
buttons.
Alarm test
• The alarm can be tested by keeping
buttons “A” and “C” pressed at the same
time in the CALENDAR or TIME mode.
Turning on/off of the hourly time signal
• With each press of buttons “A” and “C” in
the CALENDAR or TIME mode, the hourly
time signal is turned on and off alternately.
When the hourly time signal is turned on,
the hourly time signal mark appears. When
it is turned off, the mark disappears.
■ HOW TO USE THE STOPWATCH
* Before using the stopwatch, be sure to reset
the digits to “00'00"oo”.
* When measuring a long period of time,
press button “B” to return the STOPWATCH
mode to the CALENDAR or TIME mode after
the stopwatch starts. This will prevent any
possible malfunction.
• The stopwatch can measure up to 59
minutes and 59 seconds 99 in 1/100 second
increments.
• After 59 minutes and 59 seconds 99, it will
start counting again from “00'00"oo” as
many times as necessary until it is stopped.
Stopwatch operation
Press button “B” to show the STOPWATCH
mode.
The miniature battery SEIKO SR927W, Maxell
SR927W or SONY SR927W which powers your
watch should last approximately 3 years.
However, because it is inserted at the factory,
the actual life of the battery once in your
possession may be less than 3 years.
Be sure to replace the battery to prevent any
possible malfunction as soon as it runs down.
To replace the battery we recommend taking
the watch to a local watch repair shop.
Note: If the alarm is used for more than 20
seconds a day, the hourly time signal
more than 24 times a day, the
stopwatch more than once a day
and/or the illuminating light for more
than 1 second a day, the battery life
may be less than the specified period.
■ BATTERY CHANGE
■ CARE OF YOUR LORUS WATCH
• BATTERY
CAUTION
Do not expose the old battery to fire
or recharge it. Keep it at a place
beyond the reach of children. If a
child swallows it, consult a doctor
immediately.
• WATER RESISTANT
* If your watch is 200 M/20 BAR, 100 M/10 BAR
or 50 M/5 BAR water resistant, it is so
indicated on the dial/case back.
• Do not operate the buttons when the
watch is wet.
• If the watch is exposed to salt water, rinse
it in fresh water and then wipe it thoroughly
dry.
NO NO NO
YES
YES
YES NO NO
YES YES NO
Condition
of use
Accidental
contact
with water,
such as
splashes
and rain
Swimming
and taking
a shower
Skin
diving
Scuba
diving
Indication
on the dial/
case back
No
Indication
NO
NO
NO
YES
WATER
RESISTANT
WATER
RESISTANT
(50M/5 BAR
)
WATER
RESISTANT
100M/10 BAR
or above
(
NO
(
Caution:
Leather straps are not water resistant except
so indicated, even if the watch head is water
resistant.
• ALLERGIC REACTION
Because the case and band touch the skin
directly, it is important to clean them regularly.
If not, shirt sleeves may be stained and those
with delicate skin may develop a rash. Please
wear the watch with some play to avoid any
possible allergic reaction. If you develop a
rash on your wrist, stop wearing and consult a
physician.
• MAGNETISM
Your watch will be adversely affected by
strong magnetism. Keep it away from close
contact with magnetic objects.
• SHOCKS AND VIBRATIONS
Your watch may be worn for normal sports
activities, but be careful not to drop it or hit it
on hard surfaces.
• TEMPERATURE
Your watch is preadjusted so that constant
accuracy may be insured at normal tempera-
ture.
■ SERVICE
When your LORUS watch requires repair or
sevicing, please see the enclosed WARRANTY/
GUARANTEE.
Printed in China
Reset
Start Split Split
release
**
Stop
** Measurement and release of split time can
be repeated by pressing button “C”.
Split time measurement
A
C C C
A
** Restart and stop of the stopwatch can be
repeated by pressing button “A”.
Start
Stop
Restart
**
Stop Reset
Accumulated elapsed time measurement
A A A
C
A
Start
Stop
Reset
Standard measurement
A
C
A
✼ If your watch is a LORUS LUMIBRITE watch,
it has following features.
LORUS LUMIBRITE watches absorb and store
light energy from natural and artificial light
sources and emit light in the dark. They are
made of environmentally friendly material,
and therefore, are harmless to human beings
and the environment.
• With a full charge, LORUS LUMIBRITE
watches glow in the dark hours longer than
conventional luminous watches of this type.
If exposed to a light of more than 500 lux
(i.e., the brightness of a typical office) for
approximately 10 minutes, or direct sunlight
for 2 minutes, they will glow for hours.
• Since LORUS LUMIBRITE watches emit the
light they store, the brightness will decrease
gradually over time. The length of time they
will glow may also differ slightly depending
on such factors as the brightness of and
distance from the light source used to
charge the watch.
■ LUMIBRITE WATCH
PM
Press and hold button “A” in the CALENDAR or
TIME mode. The light illuminates the digital
display for easy viewing in the dark.
■ ILLUMINATING LIGHT
ALARM CHRONOGRAPH
P
M
A
C
B
A
Minutes
Seconds
1/100
seconds
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus V072 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus V072 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lorus V072

Lorus V072 User Manual - German - 18 pages

Lorus V072 User Manual - Dutch - 18 pages

Lorus V072 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info