593746

Lorus 7T92 Manual

1
Zoom out
Zoom in
Previous page
1/2
Next page
Stopwatch minute hand
1. Press button “A” for 2 seconds to select the
stopwatch hand(s) to be adjusted. The
selection of the hand(s) to be ajusted is
made in the following order by pressing
button “A” for 2 seconds.
* The selected hand(s) turn(s) a full circle.
2. Press button “B” repeatedly to set the
selected stopwatch hand(s) to the “0”
position.
* The hand moves quickly if button “B” is
kept pressed.
3. After all the adjustments are completed,
push the crown back in to the normal
position in accordance with a time signal,
checking that the hour and minute hands
for time display indicate the current time.
■ SETTING THE DATE
1. Pull out the crown to the first click.
2. Turn the crown clockwise until the desired
date appears.
3. Push the crown back in to the normal
position.
Note: Do not set the date between 9:00 p.m.
and 1:00 a.m. Otherwise, the date may
not change properly.
• Before setting the date, be sure to set the
time.
• It is necessary to adjust the date at the end
of February and 30-day months.
Date
B
• The stopwatch can measure up to 12 hours
in 1/20 second increments.
• The measured time is indicated by the four
stopwatch hands that move independently
of the hands for time display.
• When the measurement reaches 12 hours,
the stopwatch automatically stops
counting.
■ STOPWATCH
A:Start / Stop
B: Split/
Split release/
Reset
Stopwatch
1/20-second
hand
Stopwatch
second hand
Stopwatch hour
hand
Stopwatch
minute hand
[ Ex.: 2 hours, 30 minutes and 10.85 seconds ]
NREYM92C
8-2010
CAL. YM92,7T92 (RF8 SERIES)
■ CHARACTERISTICS
1. Time: Indicated by the hour, minute and
small second hands.
2. Date: Displayed in numerals.
3. Stopwatch:
Measures up to 12 hours in
1/20 second increments.
•Split time measurement
■ DISPLAY AND CROWN OPERATION
a. Normal position : Free
b. First click : Date setting
c.Second click : • Time setting
• Adjusting the stopwatch
hand position
Crown
Hour hand
Small
second
hand
■ SETTING THE TIME AND ADJUSTING
THE STOPWATCH HAND POSITION
• This watch is so designed that
1) time setting and
2) stopwatch hand position adjustment
are both made with the crown at the
second click position. Once the crown is
pulled out to the second click, be sure to
make the above adjustments at the same
time.
A
B
a b c
Date
Stopwatch hour hand
Stopwatch
1/20-second hand
Minute hand
Crown
Stopwatch
second hand
Minute hand
Hour hand
1) Time setting
Small
second hand
1. Pull out the crown to the second click when
the small second hand is at the 12 o’clock
position.
* If the stopwatch is measuring or stopped,
it is automatically reset to “0”.
2. Turn the crown to set the hour and minute
hands.
* It is recommended that the hands be set
to the time a few minutes ahead of the
current time, taking into consideration
the time required to adjust the
stopwatch hand position if necessary.
• If the stopwatch hands are not in the “0”
position, follow the procedure below to set
them to the “0” position.
Stopwatch
1/20-second hand
A
B
Stopwatch
second hand
Stopwatch
hour hand
Stopwatch minute
hand
Notes:
1. When setting the hour hand, be sure to
check that AM/PM is correctly set. The
watch is so designed that the date
changes once in 24 hours.
2. When setting the minute hand, first
advance it 4 to 5 minutes ahead of the
desired time and then turn it back to the
exact minute.
2) Stopwatch hand position adjustment
Stopwatch
hour and
minute hands
Stopwatch
1/20-second
hand
→
Stopwatch
second
hand
→
↑
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus 7T92 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus 7T92 in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lorus 7T92

Lorus 7T92 User Manual - German - 19 pages

Lorus 7T92 User Manual - Dutch - 19 pages

Lorus 7T92 User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info