756997
16
Zoom out
Zoom in
Previous page
1/18
Next page
16
User Manual
Lorenz AIS 3000 RT
Status
This is a blue LED which either indicates that a Safety Related Message has been transmitted or that the unit is in "Silent
mode". The condition indicated by the blue LED is determined during configuration of the unit by the switch option selected.
Please refer to the "Switch functions" section of this manual for more detail.
x Transmission of a Safety Related Message is indicated by both the green and blue LEDs being illuminated
TIMEOUT ERROR STATUS
POWER
x Silent mode is indicated by both the yellow and blue LEDs being illuminated.
TIMEOUT ERROR STATUSPOWER
Antennas
The Lorenz AIS 3000 RT unit requires VHF and GPS antennae independent from those in use for other purposes. Please see
Appendix A for details of the antennae required.
Maintenance
WARNING: Unauthorised opening of the AIS 3000 RT system will invalidate the warranty.
CAUTION: Avoid using chemical solvents to clean the AIS 3000 RT as some solvents can damage the case material.
NOTE: The AIS 3000 RT contains no user serviceable parts. Contact your Service Agent for repair if replacing the
fuse fails to make the equipment serviceable.
21
User Manual
Lorenz AIS 3000 RT
x A = Alarm acknowledge state
x c--c = alarm description, text
Alarms descriptions presented are:
x AIS: TX malfunction
x AIS: Antenna VSWR exceeds limit
x AIS: Rx channel 1 malfunction
x AIS: Rx channel 2 malfunction
x AIS: general failure
x AIS: no sensor position in use
x AIS: no valid SOG information
x AIS: no valid COG information
x AIS: 12V alarm
x AIS: 5V alarm
x AIS: Loss of serial interface integrity
x AIS: Background noise above -77dBm
ACK messages
Can be generated by a minimum keypad and display (MKD) unit, chart plotter or other display device connected to the AIS 3000
RT to acknowledge an alarm condition reported by the AIS 3000 RT.
ACK message format
$--ACK,xxx*hh <CR><LF>
Where
x xxx = unique alarm number
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz AIS 3000 RT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz AIS 3000 RT in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info