552526

Logicom RETRO 70 Manual

45
Zoom out
Zoom in
Previous page
1/48
Next page
45
3 – Answering machine functions
Faulty sound:
Record the message again, this time louder.
The answering machine no longer accepts any messages:
Check that the answering machine is in service.
Some messages have not been entirely recorded:
The caller's voice was too low, the machine stopped recording.
The caller stopped speaking for over 5 seconds during the recording of the
message, so the machine automatically stopped the recording.
The caller started speaking before the beep.
The answering machine's memory reached full capacity during the conversation.
For remote use (access, activation, etc.), be sure to follow these instructions:
A direct line at tone must be used.
If you call via a switchboard, a beeper must be used (not included).
If the telephone line is using pulse dialling, a beeper must be used (not included).
The remote access code is not typed in properly or is incorrect.
The answering machine cannot be activated remotely:
The memory is full (the viewer displays "FF"), all messages must be listened to
and deleted.
The remote access code is not typed in properly or is incorrect.
"PB FULL" is permanently displayed on the handset:
The answering machine's memory is full; you must listen to all the messages
then delete them to be able to record new massages.
General information
IMPORTANT
This telephone was not made to place emergency calls during a power cut. Please
ensure you make alternative arrangements.
1 – Replacing the handset batteries
After a certain amount of time, the handset batteries may discharge faster. This is due
to normal use. The batteries must be replaced.
1. Open the battery cover.
2. Take the batteries out and replace them with new Ni-Mh batteries.
3. Push the battery cover back on until you hear the click.
WARNING
Do not dispose of the batteries in fire or water. Do not dispose of them as household
waste.
Find out how you can recycle them.
2 – Safety instructions
The telephone set cannot be connected to an IT power plan.
The set is powered by an AC/DC mains adaptor, in compliance with the EN 60950
norm, plugged into a 230 V AC 50 Hz socket.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Logicom RETRO 70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Logicom RETRO 70 in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Logicom RETRO 70

Logicom RETRO 70 User Manual - French - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info