475080
3
Zoom out
Zoom in
Previous page
1/12
Next page
Wirless Audo Link - 3 -
English
- 3 -
Instructions for Use
Control
Connecting MediaVision 3D to the Subwoofer
Coupling MediaVision 3D to the
Subwoofer
A system interface Wireless Audio-Link is integrated in your MediaVision 3D.
You can use this to connect your Loewe Subwoofer to MediaVision 3D without
any annoying cables. This connection must be setup once.
The operation of Wireless Audio-Link requires a software version
for MediaVision3D of version V059 or higher. You can learn more
about updating the software on page 24 of the MediaVision3D
instructions for use.
The operation of Wireless Audio-Link requires a Loewe Subwoofer
(from art. no. 69211T10/ U10/ W10) or Subwoofer Compact with
integrated or retrofitted Module Wireless Audio Link.
Move the Wireless switch to the ON position (Loewe
Subwoofer) or move the Mode - ON/AUTO switch to the
ON position (Loewe Subwoofer Compact).
Use the mains switch to switch the subwoofer to the
ON position.
Switch MediaVision3D on.
Call up the Main Menu.
 Select the Settings option.
Select the Audio option.
 Select the Wireless Speaker option.
Press OK to confirm.
:
:
:
:
:
:
:
:
:
Audio
Language
Display
Cancel
OK
Pairing of Wireless Speakers
Start pairing with OK. Then you have one mi-
nute to press pairing button at your subwoofer
to confi rm.
Speaker Setup
Dolby PL II
Lock
Network
Others
Select the On option.
Press OK to confirm.
Use a sharp object (e.g. paperclip) to confirm within one
minute the Wireless Pairing (Loewe Subwoofer) button
or the button in the opening between the two switches
Mode Stereo and Auto (Loewe Subwoofer Compact).
The pairing takes up to 10 seconds.
A notification will appear if the pairing is successful.
A red message appears in the display of the MediaVision
3D when it is in Wireless Audio Link mode.
If the pairing is not successful, switch the units off
and on again after 30 seconds and repeat the above
procedure. Reduce the distance from the subwoofer to
MediaVision 3D.
Once it is successfully connected, turn each of the three knobs
on the Loewe Subwoofer by a quarter turn and specify the desired
settings for the equaliser, the bass intensity and the limiting
frequency. This initialises the correct values to wirelessly operate
the amplifier.
The distance between the subwoofer and audio source must not
exceed 10 m in the same room.
If you wish to toggle between the operating modes Wireless or
Cable via Audio-Link, switch the units off for minimum 30 seconds
and then on again.
The rotary knobs Crossover Frequency, Equalizer and Bass Inten-
sity at the Subwoofer Compact do not have any function in Wireless
operating mode. In the Menu of MediaVision 3D you can adjust
the sound settings.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Wireless Audio Link at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Wireless Audio Link in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info