525582
15
Zoom out
Zoom in
Previous page
1/18
Next page
15
Mounting the satellite speaker on the S stand
You can mount the Tremo satellite speaker on the
S stand. See the installation instructions provided
with the stand.
You do not need the following parts:
Flange (2) and the screws (B, C1 – C3).
Proceed as follows:
•Fix the conical base (included in the scope of
delivery of the Tremo speaker system) in place
of the flange at the top end of the pillar with
the screw (B). Use the screws provided with the
Tremo satellite speaker.
Note:
The screws can be found with the speaker
cable.
•Feed the speaker cable from top to bottom
through the conical base. Leave about 5 cm of
the speaker cable protruding.
Remove the cover over the connections from
the Tremo satellite speaker. Clamp the speaker
cable in the clamp sockets. Push the cover back
on.
Pull back the speaker cable and place the Tremo
satellite speaker on the conical base. It is con-
nected with a bayonet catch with pins of differ-
ent widths so that the speaker can only be
mounted so that the terminals come to rest
directly over the speaker cable. When the
speaker has been inserted correctly in the bayo-
net, pull the speaker cable back again and fix it
with a quarter turn to the left. If this proves
difficult, wet the rubber foot of the satellite
speaker slightly with a damp cloth.
Now lay the cable in the groove of the pillar
(3x).
Proceed as described in the installation in-
structions for the S stand. The speaker cable
of the Tremo satellite speakers has no plug
connections, the stripped cable is simply
clamped in sockets.
BA31673_002Tremo_GB_5 31.08.2004, 13:18 Uhr15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Loewe Tremo - auro 8116 DT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Loewe Tremo - auro 8116 DT in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Loewe Tremo - auro 8116 DT

Loewe Tremo - auro 8116 DT User Manual - German - 18 pages

Loewe Tremo - auro 8116 DT Usermanual and installation guide - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info