610406
13
Zoom out
Zoom in
Previous page
1/17
Next page
10
USER'S MANUAL
Split Wall-Mounted Air Conditioner
*
When the signal from the remote controller becomes weak and the
indoor unit can not receive it properly;or the indications on the display
screen becomes blurred,please slide the back cover and replace with
two new batteries.
*
The positive and negative poles must match the installation positions.
*
New batteries of the same type have to be used for replacement.
*
If the remote controller is not to be used for long time,take out the
batteries so as to prevent the leakage of the electrolyte from damaging
the controller.
*
If when the remote controller is at abnormal state,you can take out
the batteries on the back cover to clear off the display.
REPLACEMENT OF BATTERIES
Use this mode to reduce operation sound when sleeping,etc.
Press the SLEEP button,the air flow sound from the indoor unit is decreased.
Press the SLEEP button again can release the mode.
NOTE:
*
Use the sleep mode when you are going to bed.If this mode is used in the day,the capacity is reduced since the
ambient temperature is too high.(COOL MODE).
*
During the operation of cooling,the room temperature will be raised gradually by 2
0
C(4
0
F) higher than the setting
after the machine begins to operate in the sleeping mode.
*
During the operation of heating mode,the room temperature will be dropped gradually 5
0
C (9
0
F)lower than the
setting after the machine begins to operate in the sleeping mode.
*
Features of Heating Operations
*
*
The machines absorb heat from the outdoor air and transfer it indoors so as to heat the room air. The heating
capabilities through this principle of heat pump go up/down with the increase/decrease of the temperatures of the
outdoor air.
*
It only needs a fairly short time for such hot air circulation system to raise the room temperature.
*
When the outdoor air temperature is very low, the system can be used together with other heating devices. But
good ventilation should be maintained to ensure safety and prevent accidents.
Basic principles and performances
Defrosting
When the outdoor air temperature is very low and humidity is very high, frosting will occur to the heat exchanger of
the outdoor unit, which has negative impacts upon the efficiency of the heating performance. In such case, the
automatic defrosting function will come into play. The heating operation will be stopped for 5-10 minutes to do the
defrosting.
*
The fans of both the outdoor and indoor units are stopped.
*
During the defrosting, the outdoor unit might generate some steam. It is caused by fast defrosting, which is
not a performance failure.
*
Upon the completion of the defrosting process, the heating operation is resumed.
Remote Controller 1
Remote Controller 2
SLEEP OPERATION
Releasing procedure
When the indication on display screen is 24 hour,press the TIMER button again to delete the timed mode.
s
l
i
d
e
t
h
e
b
a
c
k
c
o
v
e
r
RST button
Unload the back Cover
CLK
RST
This button let computer reset.
CLK button
It does not work on this model.
(push the RST button with the tip of a
ball pen,etc)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lloyd LS13A2N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lloyd LS13A2N in the language / languages: English as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lloyd LS13A2N

Lloyd LS13A2N Installation Guide - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info