813569
3
Zoom out
Zoom in
Previous page
1/8
Next page
2
3
de punt van de bovenstang. Zorg ervoor dat de uitstekende
houderarmen tegenover de schroefgaten aan het uiteinde van
de stang staan. Bevestig ze aan beide zijden met de moeren.
SCHRITT 5 | STEP 5 | ÉTAPE 5 | PASSAGGIO 5 | STAP 5
DE
Stecken Sie die obere Stange in die mittlere Stange.
Schrauben Sie sie mit den mitgelieferten M6 Schrauben
(12) zusammen und ziehen Sie sie mit dem mitgelieferten
Inbusschlüssel fest (10). |
EN
Insert the upper bar into the
middle bar. Screw them together with the M6 screws (12),
and tighten them with the Allen key (10) provided. |
FR
Insérez la barre supérieure dans la barre centrale. Vissez-les
ensemble avec les vis M6 fournies (12) et serrez-les à fond
avec la clé Allen jointe à la livraison (10). |
IT
Inserire l‘asta
superiore nell‘asta centrale. Avvitarla con le viti M6 (12) in
dotazione e serrarla con la chiave a brugola (10) in dotazione.
|
NL
Schuif de bovenstang in de middenstang. Schroef ze met
de meegeleverde M6-moeren (12) vast met behulp van de
meegeleverde inbussleutel (10).
SCHRITT 6 | STEP 6 | ÉTAPE 6 | PASSAGGIO 6 | STAP 6
DE
Schrauben Sie die Halterungen (7) an der Außenseite
der Arme des Halterungskopfs fest und setzen Sie
die Sicherungsmutter (7) von der Innenseite des
Halterungskopfs auf die Schrauben. Halterung auf den
gewünschten Winkel einstellen und mit dem mitgelieferten
Schraubenschlüssel (10) festziehen. |
EN
Screw the
brackets (7) to the outside of the bracket head arms, and
place the locking nuts (7) onto the screws from the inside
of the bracket head. Set the bracket to the desired angle,
and tighten with the wrench (10) provided. |
FR
Vissez
les fixations (7) sur le côté extérieur des bras de la tête du
support et insérez les écrous de sécurité (7) de l‘intérieur
de la tête du support sur les vis. Régler la fixation sur l‘angle
désiré et le serrer à fond avec la clé anglaise fournie (10).
|
IT
Avvitare i supporti (7) all‘esterno dei bracci della testa
supporto e posizionare il controdado (7) dall‘interno della
testa supporto sulle viti. Regolare il supporto all‘angolo
desiderato e stringere con la chiave (10) in dotazione. |
NL
Schroef de houders (7) aan de buitenzijde van de armen
van de houderkop vast en plaats de borgmoer (7) van
de binnenkant van de houderkop op de moeren. Stel de
houder in op de gewenste hoek en draai hem vast met de
meegeleverde moersleutel (10).
SCHRITT 7 | STEP 7 | ÉTAPE 7 | PASSAGGIO 7 | STAP 7
DE
Setzen Sie den Livington Instant Heater in die Halterungen
ein und ziehen diese fest. |
EN
Insert the Livington Instant
Heater into the brackets and tighten them. |
FR
Mettez le
Instant Heater de Livington en place dans les fixations et
serrez-les à fond.|
IT
Inserire il Livington Instant Heater nei
supporti e stringerli. |
NL
Plaats de Livington Instant Heater
in de houders en trek deze vast.
7
8
7
3
11
10
2
M23883_LivingtonInstantHeaterUpsell_Manual_A5_20220930_TC.indd 3M23883_LivingtonInstantHeaterUpsell_Manual_A5_20220930_TC.indd 3 30.09.22 08:0430.09.22 08:04
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Livington M23883 Instant Heater at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Livington M23883 Instant Heater in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info