649223
50
Zoom out
Zoom in
Previous page
1/61
Next page
50 NL/BE
Ingebruikname
Afstandsbediening gebruiken
OPGELET! Alle functies van de afstandsbediening
staan ter beschikking, als de LED-plafondlamp
5
wordt ingeschakeld met de wandschakelaar.
Licht aan- / uitschakelen
1. Licht inschakelen
Druk op de „ “ knop (lighting)
13
, om de
LED-plafondlamp
5
in te schakelen. Het ont-
vangstsignaal wordt bevestigd door middel
van een piep-geluid.
2. Licht uitschakelen
Druk op de „ “ knop (lighting)
14
, om de
LED-plafondlamp
5
uit te schakelen. Het ont-
vangstsignaal wordt bevestigd door middel van
een piep-geluid.
Licht dimmen
1. Verlichtingssterkte verhogen
Druk op de „ “ knop dimmer +
15
, om de
verlichtingssterkte te laten toenemen. Als het
maximum qua verlichtingssterkte is bereikt, hoort
u een piep-geluid. Bij kortstondig drukken van
deze knop wordt de verlichtingssterkte trapsge-
wijs per keer drukken verhoogd. Wordt de „
knop dimmer +
15
langer ingedrukt, wordt de
verlichtingssterkte automatisch verhoogd tot de
maximale helderheid.
2. Verlichtingssterkte verminderen
Druk op de „ “ knop dimmer –
16
, om de
verlichtingssterkte te verminderen. Als het mini-
mum qua verlichtingssterkte is bereikt, hoort u
een piep-geluid. Bij kortstondig drukken van de
ze
knop wordt de verlichtingssterkte trapsgewijs
per keer drukken verminderd. Wordt de „
knop dimmer –
16
langer ingedrukt, wordt de
verlichtingssterkte automatisch verminderd tot
de minimale helderheid.
30 minuten-timer
1. Timer inschakelen
Druk op de „ “ knop
17
, om de LED-plafond-
lamp
5
automatisch uit te schakelen. Het ont-
vangstsignaal wordt met een dubbel piep-geluid
bevestigd.
Het licht en ook de Bluetooth-functie (muziek)
worden automatisch na ca. 30 minuten uitge-
schakeld.
2. Timer uitschakelen
Wilt u de timer-functie tijdens de 30 minuten
uitschakelen, drukt u nogmaals gedurende meer
dan 3 seconden op de „
“ knop
17
. Als het
signaal door de LED-plafondlamp
5
wordt ont-
vangen, hoort u een langgerekt piep-geluid wat
het uitschakelen van de timer-functie bevestigd.
Bluetooth-verbinding
1.
Bluetooth-verbinding tot stand brengen
Druk op de audio „ “ knop (audio)
18
. Het
ontvangstsignaal wordt bevestigd door middel
van een piep-geluid.
Ca. 1–2 seconden later wordt de Bluetooth-ver-
binding akoestisch ondersteund automatisch
opgebouwd, de blauwe LED in de LED-plafond-
lamp
5
begint snel te knipperen.
Als de verbinding is opgebouwd, hoort u een
korte melodie.
Bij de eerste verbinding met uw mobiele tele-
foon, tablet etc. kiest u de Bluetooth-verbinding
„LBT00738“.
2. Bluetooth-verbinding beëindigen
Druk op de audio „ “ knop (audio)
19
. Het
ontvangstsignaal wordt bevestigd door middel
van een piep-geluid. De Bluetooth-verbinding
wordt beëindigd.
Ingebruikname / Onderhoud en reiniging / Afvoer
50


Need help? Post your question in this forum.

Forumrules
1

Forum

livarnolux-ian-113911

Reset search

  • After 3 years of use the lamp has started blinking when switched on. The installation is fine, coul it be the transformer. Is it possible to replace it? Submitted on 27-4-2020 at 19:19

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LivarnoLux IAN 113911 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LivarnoLux IAN 113911 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info