815246
6
Zoom out
Zoom in
Previous page
1/6
Next page
29
NOTE: Set up as close to power source as possible. The product
should be periodically examined for potentially unsafe conditions
such as: damaged cord, plug, housing or parts, and that in the
event such damage is found, the product should not be used until
properly repaired. Never leave the blower outside in the rain or
exposed to the elements when not in use. When in use, do not
place the cord across traffic areas, water or damp areas. The
blower should be placed on a stable surface and anchored per
product instructions. The power cord of the blower is equipped
with a Ground Faulty Current Interrupter (GFCI) plug.
1) Make sure that the blower switch is in the “OFF” position. Plug
the blower into a properly grounded 110-120V GFCI outlet.
2) If the GFCI has been tripped, press the “RESET” button to
restore power to the blower.
3) Set the power switch of the blower to “ON” to inflate. After use,
turn the power to “OFF”.
4) To disconnect, have an adult grip it tightly and pull the plug
from wall outlet.
ADULT SET-UP AND SUPERVISION REQUIRED.
Use only with Ground Fault Circuit Interrupt (GFCI) receptacle.
• This blower is for residential use only. It is not intended to be
used in commercial or industrial settings.
• Never insert fingers, pencils or any other object through the grill
at ANY time.
• Do not operate blower with a damaged cord or plug, after the
appliance malfunctions or has been dropped or damaged in any
manner.
• Do not operate in the presence of explosive and/or flammable
fumes.
• Never connect the blower to any solid - state speed control
device.
• To reduce the risk of fire or electric shock, do not use this blower
with any solid-state speed control device.
WARNING - Electronic hazard - Do not use extension cords with
this product.
Always unplug the blower before servicing.
Outdoor use only.
OPERATED PRODUCT
MODEL FJ-28
BLOWER SPECIFICATIONS: 120V (AC),
60 Hz, 3.5A, 420W
SPECIFICATIONS MAY CHANGE WITHOUT NOTICE.
GROUNDING INSTRUCTIONS FOR ALL GROUNDED, CORD-CONNECTED PRODUCTS
This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by
providing an escape wire for the electric current. This product is equipped with a cord having a grounding wire with an ap-
propriate grounding plug. This plug must be plugged into an outlet that is properly installed and grounded in accordance with
all local codes and ordinances. DANGER - Improper installation of the grounding plug can result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either flat blade terminal. The
wire with insulation having an outer surface that is green, with or without yellow stripes, is the Grounding wire. Check with a
Qualified electrician or serviceman if the grounding instructions are not completely understood, or if in doubt as to whether
The product is properly grounded. Do not modify the Plug provided; if it will not t the outlet, have the Proper outlet installed
By a qualified electrician. For a grounded, cord-connected product, rated less than 15 amperes and intended for use on a
Nominal 110-120-volt supply circuit, these instructions should be followed. This product is for use on a nominal 110-120-
volt supply circuit, and has a grounding plug that looks like the plug illustrated in sketch A. Temporary adapters should not
be used. Do not use product until a properly grounded outlet (sketch A) can be installed by a qualified electrician.
CAUTION: The blower is a high volume blower, and is capable of moving lots of air very quickly. Place the blower in
an area where it will not suck in dirt or leaves. Keep away from water and trafc. Keep children away from the blower.
Only the blower supplied should be used for inflation.
Safety Warnings: ELECTRICAL BLOWER
This blower is not a toy. Use under the direct supervision of a competent adult. Keep away from children.
READ AND SAVE THESE INSTRUCTIONS.
T
S
ET
TE
SER
GROUNDING METHODS
Grounding
pin
DANGER
INSTRUCTIONS FOR BLOWER CLEANING AND STORAGE
Do not immerse the blower in water. Unplug the blower before cleaning. To clean: wipe with a damp cloth. The blower does not require
any lubrication and has no user serviceable parts. Do not attempt to service the blower. When not in use, store the blower indoors in a
dry place. Store the blower upright on a stable surface. Loosely coil the cord and place it beside the blower.
LISTED
E234531
IMPORTANT - Inflatable Water Park MUST be drained of all water and be COMPLETELY DRY before storage in order to avoid mold and mildew.
DO NOT fold and store Water Park if any moisture remains.
IMPORTANT - All children MUST EXIT the Water Park before deflation or draining water.
IMPORTANT - For best results, 2-4 people should drain and move the Water Park.
Draining & Deflation
1
Turn off the garden hose
Disconnect
2
Turn off the garden hose
and disconnect it from the
Clear Plastic Tubing.
4
Remove stakes and drag the Water Park
away from the drained water to a dry area.
8
7
Once Water
Park is
completely
dry, turn off
the blower
motor and
unplug it
from the outlet.
Untie the drawstring from
the short Outlet Tube and
allow the Water Park to
fully deflate. Remove the
Hose Assembly and wrap
it up with no kinks.
Remove and
drain the Hose
Assembly from
the Water Park.
5
Re-stake the Water Park
and blower, tie the
Inflation tube to the
blower, then reconnect
and power up the blower.
6Leave the Water Park inflated
until all remaining water has
evaporated and the Water
Park is dry. This may take 2
hours or more depending on
weather conditions.
Turn off the blower
motor and unplug it
from the outlet.
Move the blower to dry
ground if it appears
that it will get wet
from draining water. Switch power off
As the Water Park deflates, water will find
the lowest point and drain from the
collapsing pool walls.
Lift the bottom of pool from one side to
the other to let the remaining water drain.
3
CAUTION: ELECTRICALLY
INSTRUCTIONS FOR BLOWER INSTALLATION WARNING: Failure to follow these instructions
could result in serious injury or death.
USE ONLY ON GFCI PROTECTED RECEPTACLES CAUTION
WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH. ADULT SET-
UP AND SUPERVISION REQUIRED.
DANGER - TO PREVENT ELECTRIC SHOCK, DO NOT IMMERSE
IN WATER. WIPE CLEAN WITH DAMP CLOTH.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Little tikes 621475 Rocky Mountain River Race Waterpark at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Little tikes 621475 Rocky Mountain River Race Waterpark in the language / languages: English as an attachment in your email.

The manual is 0.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info