602390

Linksys X2000 Manual

22
Zoom out
Zoom in
Previous page
1/226
Next page
22
Troubleshooting
Linksys X2000
22
X2000
Your computer cannot connect to the Internet.
Follow the instructions until your computer can connect to the Internet:
• Make sure that the Modem Router is powered on. The Power LED should
be green and not flashing.
• If the Power LED is flashing, then power off all of your network devices,
including the Modem Router and computers. Then power on each device
in the following order:
a.
Modem Router
b.
Computer
• Check the LEDs on the device’s front panel. Make sure the Power, DSL,
and at least one of the numbered Ethernet LEDs are lit. If they are not,
then check the cable connections. The computer should be connected to
one of the Ethernet ports numbered 1-4 on the device, and the device’s
DSL port must be connected to the ADSL line.
When you double-click the web browser, you are prompted for a user name
and password. If you want to get rid of the prompt, follow these instructions.
Launch the web browser and perform the following steps (these steps are
specific to Internet Explorer but are similar for other browsers):
1.
Select Tools > Internet Options.
2.
Click the Connections tab.
3.
Select Never dial a connection.
4.
Click OK.
You are using a static IP address and cannot connect.
Refer to Windows Help and change your Internet Protocol (TCP/IP) Properties
to Obtain an IP address automatically.
The computer cannot connect wirelessly to the network.
Make sure the wireless network name or SSID is the same on both the computer
and the device. If you have enabled wireless security, then make sure the same
security method and key are used by both the computer and the device.
You need to modify the basic settings on the device.
Run the Setup Wizard on the Setup CD-ROM.
You need to modify the advanced settings on the device.
Open the web browser (for example, Internet Explorer or Firefox), and enter the
device’s IP address in the address field (the default IP address is 192.168.1.1).
When prompted, complete the User name and Password fields (the default user
name and password is admin). Click the appropriate tab to change the settings
You cannot use the DSL service to connect manually to the Internet.
After you have installed the router, it will automatically connect to your Internet
Service Provider (ISP), so you no longer need to connect manually.
When you open the web browser, the login screen appears, even though you
do not need to log in.
These steps are specific to Internet Explorer but are similar for other browsers.
1.
Open the web browser.
2.
Go to Tools > Internet Options.
3.
Click the Connections tab.
4.
Select Never dial a connection.
5.
Click OK.
Troubleshooting
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys X2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys X2000 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 10,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info