693631
77
Zoom out
Zoom in
Previous page
1/82
Next page
POD Farm 2 Basic User Guide - Standalone Operation
4•6
The Tone A Input Source menu options with a UX2 device - Single Tone Mode (left) Dual Tone mode (right)
For descriptions of additional Tone A & B controls, please refer to the POD Farm 2 Plug-In chapter’s
section “Mixer View” on page 3•23. Also see “Record Send Behaviors” on page 4•7 for how Tone A & B
Mixer controls interact with the Record Sends.
UX1, UX2 & KB37 Users: If you want to Mute only the Main, Analog Outs of your device but still hear
your monitor signal through your Headphones output (such as when recording with a Mic, where you
need to silence your monitor system in the room) use the “Mute Mains for Mic Record” option in the
Preferences - Tones dialog.
A/B Switch Box
The function of the A/B Switch Box is to allow you to route a single input source into either Tone A
or Tone B, or into both. If you have a Dual Tone configuration within POD Farm 2, with a single input
source (or when Tone B’s Input Menu is set to “Same as Tone A”) you’ll see this A/B Switch Box active
in the Mixer. Whenever you have a Single Tone configuration, or have different input sources in Tone
A and B, the A/B Switch Box is disabled.
Click the A/B button to toggle between feeding your single input source into either Tone A or
Tone B. The A and B lights tell you which Tone is active.
Click the A+B button to feed your single input source into both Tones A and B simultaneously.
Both A and B lights illuminate to indicate A+B mode is active.
Note that this is a duplicate of the A/B Switch Box you see in the Signal Flow View and functions the
same - we’ve simply added it here as well so that you can easily toggle these Tone A/B options while
making your Mixer adjustments. Wasn’t that thoughtful of us?
Record Send Controls
The controls in this section allow you to select the type of signal routed to POD Farm 2 Record Sends
1-2 & 3-4 (or Sends 9-10 & 11-12 for UX8 devices), and adjust Send output levels. You can think
of the two Record Sends as “virtual pipelines” that each carry a stereo output signal from POD Farm
2, allowing you to select your POD Farm signals within your recording software as Input sources for
recording into audio tracks.
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Line 6 POD Farm 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Line 6 POD Farm 2 in the language / languages: English as an attachment in your email.

The manual is 4,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Line 6 POD Farm 2

Line 6 POD Farm 2 User Manual - Dutch - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info