693633

Line 6 Helix Control Manual

58
Zoom out
Zoom in
Previous page
1/62
Next page
58
4. Set both tracks' outputs, as well as the DAW Master output,
to Helix USB 1/2 to allow all tracks to play back through Helix.
NOTE: Setting the stereo track's output to Helix USB 1/2 allows you to hear
your Helix-processed tone via the Helix hardware monitoring while record-
ing.Forthisconguration,disablesoftwaremonitoringonallDAWtracks.
5. Arm both these DAW audio tracks, hit the Record button and
start laying down your guitar performance!
Now you have your Helix-processed track to hear with the project, and a separate DI
track with which you can further experiment at any time with DAW plug-ins and/or re-
amping (see the next section).
Re-amping Through Helix
If your DAW software provides options for routing individual audio tracks to outputs
other than just the main Helix USB Out 1/2, then you can use these steps for re-amp-
ing a dry recorded DI track back through Helix.
1. In your DAW software, set the DI track's Output setting to a
Helix stereo USB Out other than USB Out 1/2. For this example
we'll use Helix USB Out 3/4.
2. Create a new stereo track in your DAW project and set this
track's Input and Output both to USB 1/2 - Let's name this
track "Re-amped." Arm the track for recording.
NOTE: In some DAW software it may be necessary to also activate the
software monitoring feature on this "re-amped" track to monitor the Helix-
processed signal when playing back your project. See your software's docu-
mentation.
3. On Helix, select the Input block and set it to receive from the
same USB stereo pair (USB In 3/4) and keep the Output block
set to "Multi." Load your choice of amps and eects on the
current Helix preset.
16B Dream Rig Duet
FeedbackTime
[37%]
Delay Harmony Delay
LevelMixKeyScale
0.0 dB40%MinorD1/8
DRY DI GUITAR
USB
RE-AMPED GUITAR
TRACK 1 (Dry DI Guitar)
T
RA
C
K
2
(
Processed
G
uitar
)
TRACK 3 (Re-amped Guitar)
4. Now play your DAW project and you'll hear the DI track "re-
amped" through your Helix! Adjust the DI track's volume slider
to make sure the signal feeding into Helix is not too hot. Tweak
your Helix amp & eects as desired while listening with the
playback of your project mix.
5. Once you have your re-amplied guitar tone they way you like
it, Solo both the DI and re-amped tracks, rewind to the start of
the project and hit the DAW Record button, allowing it to cap-
ture the signal into the new re-amped track in real-time.
Allow the DI track to play to the end, stop recording and you've created your new re-
amped guitar track!
TIP: Note that you still have your original Guitar DI track, and you can repeat this
processtocreateadditionalre-ampedtrackswithdierentHelixsettings,add
plug-ins, blend with your original guitar track and more.
… 58 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Line 6 Helix Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Line 6 Helix Control in the language / languages: English as an attachment in your email.

The manual is 12,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Line 6 Helix Control

Line 6 Helix Control User Manual - Dutch - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info