600891
2
Zoom out
Zoom in
Previous page
1/80
Next page
2
Safety Symbol and Signal
Word Review
This garage door opener has been designed and
tested to offer safe service provided it is installed,
operated, maintained and tested in strict
accordance with the instructionsand warnings
contained in thismanual.
When you see these Safety Symbols and Signal
Words on the following pages,they will alertyou
to the possibility ofserious injury or death if you
do not complywith the warningsthat accompany
them. The hazard may come from something
mechanical or from electric shock.Read the
warningscarefully.
Mechanical
Electrical
When you see thisSignal Word on the following
pages, itwill alert you to the possibility ofdamage
to your garage door and/or the garage door
opener if you do not complywith the cautionary
statementsthataccompanyit. Read them
carefully.
Check the Door
1. Disable locks and remove any ropes
connected to the garage door.
2. Liftthe door halfwayup. Release the
door.If balanced,itshould stay in
place, supported entirely byitssprings.
3. Raise and lower the door to check for
binding or sticking. Ifyour door binds,
sticks, or is outof balance, call a trained
door systems technician.
4. Check the seal on the bottom of the
door.Anygap between the floor and
the bottom ofthe door must notexceed
1/4 inch (6 mm). Otherwise, the safety
reversal systemmay notwork properly.
5. The opener should be installed above
the center ofthe door.If there is a
torsion spring or center bearing plate
in the wayof the header bracket, it may
be installed within 4 feet (1.2 m) to the
leftor right of the door center.See
page 7.
Torsion Spring
Extension
Spring
OR
To preventpossible SERIOUSINJURYor
DEATH:
ALWAYS call a trained door systems
technician if garage door binds, sticks, or is
out of balance.An unbalanced garage
door mayNOT reverse when required.
NEVER try to loosen,move or adjust
garage door, door springs, cables,pulleys,
brackets or their hardware, ALLofwhich
are under EXTREMEtension.
Disable ALLlocks and remove ALLropes
connected to garage door BEFORE
installation and operating garage door
opener to avoid entanglement.
To preventdamage to garage door and
opener:
ALWAYS disable locksBEFORE installing
and operating the opener.
ONLY operate garage door opener at
120 V, 60 Hzto avoid malfunction and
damage.
Tools Needed
2
1
3/16
7/16
1/2
5/32
5/16
5/8
9/16
1/4
7/16
Preparation
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liftmaster 8360 Premium at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liftmaster 8360 Premium in the language / languages: English as an attachment in your email.

The manual is 12,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info