359465
4
Zoom out
Zoom in
Previous page
1/26
Next page
3 Controls and displays
3.1 Operating and control elements
Fig. 3
(1) Alarm button (8) Fan button
(2) SuperCool button (9) Temperature display
(3) On/Off button (10) Fan symbol
(4) Alarm symbol (11) Child-proofing symbol
(5) Menu symbol (12) SuperCool symbol
(6) Down setting button (13) Net@Home symbol
(7) Up setting button
3.2 Temperature display
The following are displayed in normal operation:
-
the average cooling temperature
The following displays indicate malfunction. Possible causes and
corrective action (see Malfunction).
-
F0 to F9
4 Putting into operation
4.1 Changing over the door hinges
You can change over the door hinges if necessary.
NOTICE
Risk of damage to side-by-side appliances due to condensation!
When a Side-by-Side appliance (S…) is fitted together with a
second appliance (as a SBS combination), the door hinges must
remain as delivered.
u
Do not change over the door hinges.
Ensure that the following tools are to hand:
q
Torx 25
q
Torx 15
q
Screwdriver
q
Cordless screwdriver, if necessary
q
Second person for fitting work, if needed
4.1.1 Detaching the door
Note
u
Remove any food from the door racks before removing the
door, so that no food falls out.
Fig. 4
u
Close the door.
u
Pull off the cover
Fig. 4 (10)
forwards and upwards.
u
Lift off the cover
Fig. 4 (11)
.
CAUTION
Risk of injury if the door tips!
u
Take good hold of the door.
u
Set down the door carefully.
u
Unscrew the upper turn hinge
Fig. 4 (12)
(2 Torx 25)
Fig. 4 (13)
and raise it for removal.
u
Lift up the door and set it aside.
4.1.2 Changing bearing parts
Fig. 5
u
Draw the safety lock
Fig. 5 (21)
forwards for removal.
u
Remove the cover
Fig. 5 (27)
.*
u
Fully retract the adjustable-height foot
Fig. 5 (22)
.
u
If necessary, tip the appliance back a little with the assistance
of a second person for removal of the bearing pin.
u
Pull out the bearing pin
Fig. 5 (22)
downwards and forwards.
In so doing, pay attention to the hinge bush
Fig. 5 (20)
.
u
Unscrew the turn hinge
Fig. 5 (23)
(2 Torx 25)
Fig. 5 (24)
.
u
Unscrew the bearing part
Fig. 5 (26)
(1 Torx 25),
Fig. 5 (28)
,
transfer it to the opposite hole in the turn hinge and screw it
down again.
u
Carefully lift off and transfer the cover
Fig. 5 (25)
on the handle
side.
u
Screw down the turn hinge
Fig. 5 (23)
on the new hinge side,
possibly with the aid of a cordless screwdriver, through the
outer oblong hole and round hole.
Note
u
If necessary, e.g. to make up for any unevenness in the floor,
the second oblong hole can be used instead of the round hole
for the screw fitting.
Controls and displays
4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr k 4260 tgl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr k 4260 tgl in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr k 4260 tgl

Liebherr k 4260 tgl User Manual - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info