715301
8
Zoom out
Zoom in
Previous page
1/10
Next page
16
5.6.6 Drawers
Note
Insucient ventilation results in the energy consumption rising
and the refrigeration capacity falling.
Appliances with NoFrost:
Leave the bottom drawer inside the appliance!
Always keep the inside vents at the rear wall clear!
Remove the drawers as shown in Fig. 5.
5.6.7 VarioSpace
Fig. 3
You can remove the drawers. This makes space for large freezer
items. Poultry, large joints of meat and game, and large bakery
goods can be stored and subsequently prepared whole.
The drawers can each be loaded with max. 20 kg of frozen
food.
6 Maintenance
6.1 Defrosting with NoFrost
The NoFrost system automatically defrosts the appliance.
Refrigerator compartment:
The defrost water evaporates due to the compressor heat. Drops
of water on the rear wall are perfectly normal.
Regularly clean the drain opening to allow the water to ow
away (see 6.2).
Freezer compartment:
The moisture condenses on the evaporator, is periodically
defrosted and evaporates.
The appliance does not have to be manually defrosted.
6.2 Cleaning the appliance
Clean the appliance regularly.
WARNING
Risk of injury and damage as a result of hot steam!
Hot steam can lead to burns and can damage the
surfaces.
Do not use any steam cleaners!
NOTICE
Incorrect cleaning damages the appliance!
Do not use cleaning agents in their concentrated form.
Do not use any scouring or abrasive sponges or steel wool.
Do not use any sharp or abrasive cleaning agents, nor any
that contain sand, chloride or acid.
Do not use chemical solvents.
Do not damage or remove the type plate on the inside of the
appliance. It is important for the customer service.
Do not pull o, bend or damage cables or other components.
Do not allow any cleaning water to enter the drain channel,
ventilation grille or electrical components.
Please use soft cleaning cloths and a universal pH-neutral
cleaning agent.
Please use soft cleaning cloths and a universal pH-neutral
cleaning agent.
Empty the appliance.
Pull out the power plug.
Clean the outer walls and interior surfaces,
as well as equipment parts by hand with lukewarm
water and a little washing-up liquid.
Only clean painted
side walls by wiping with a soft, clean
cloth. In case of heavy soiling, use lukewarm water and
a neutral cleaning product.
Only clean painted door surfaces by wiping with a soft,
clean cloth. In case of heavy soiling, use a little water
or a neutral cleaning product. Optionally, a microbre cloth can
be used.
The stainless steel doors are treated with a
premium surface nish.
Stainless steel care products attack these surfaces.
Clean the drain opening Fig. 8: If necessary remove deposits
with a thin object, such as a cotton bud or similar.
After cleaning:
Wipe dry the appliance and items of equipment.
Connect the appliance and switch it on again.
Switch on SuperFrost (see 5.6.4).
When the temperature is suciently cold:
Put the food back inside.
6.3 Customer service
Fig. 12
First of all check whether you can eliminate the fault yourself (see
Malfunction). If this is not possible, contact Customer Services.
You can nd the address in the enclosed customer service list.
WARNING
Risk of injury if repair work is not carried out professionally!
Have any repairs and action - not expressly specied - on the
appliance and mains cable carried out by service personnel
only. (see Maintenance)
For the appliance designation Fig. 12 (1), service no. Fig. 12
(2) and the serial no. Fig. 12 (3) refer to the type plate. The
type plate is located on the left, inside the machine.
Inform customer service and describe the fault, appliance
designation Fig. 12 (1), service no. Fig. 12 (2) and serial no.
Fig. 12 (3).
This will make it possible to provide fast and accurate service.
Leave the appliance plugged in until customer service arrives.
The food will stay cold for longer.
Pull out the plug (do not tug on the connection cable here) or
switch o the circuit breaker.
Maintenance / Malfunctions
* Depending on model and options
You do not have to activate SuperFrost in the following cases:
- when placing frozen food in the freezer
- when freezing up to approx. 2 kg fresh food daily
Freezing with SuperFrost
Briey press the SuperFrost button Fig. 11 (7).
The SuperFrost symbol Fig. 11 (10) is shown on the display.
The freezing temperature is reduced, and the appliance
operates at the maximum freezing capacity.
Note
Pressing the SuperFrost button can cause the compressor
to switch on up to 8 minutes later, thanks to the integrated
switch-on delay. This delay increases the service life of the
compressor.
In case of a small amount of food to be frozen:
Wait approx. 6 hours.
In case of the maximum amount of food to be frozen (see type
plate):
Wait approx. 24 hours.
Place packaged food in the top drawers.
SuperFrost is automatically deactivated after about 65 hours.
The SuperFrost symbol Fig. 11 (10) goes out when freezing is
nished.
The appliance continues to operate in the energy-saving,
normal mode.
8


Need help? Post your question in this forum.

Forumrules
1

Forum

liebherr-cn-4713

Reset search

  • I can’t find the instructions ‘to change the door hinges’ , can you help please ? Submitted on 14-9-2021 at 23:28

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CN 4713 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CN 4713 in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CN 4713

Liebherr CN 4713 User Manual - German - 10 pages

Liebherr CN 4713 User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info