558285
15
Zoom out
Zoom in
Previous page
1/16
Next page
15
Controlling your TV with the supplied remote control and
technical specifications
Specifications are correct at time of printing. LG is constantly innovating and products may change
at any time without warning.
Specifications
General
Power 110-240V~, 50/60Hz
Power consumption Approx. 12 Watts (Energy Saving mode: 3 Watts)
Video Head System Double azimuth 4 heads, helical scanning (GC990W/GC480W)
Rotary 2 heads, helical scanning (GC260W)
Tape speed PAL: 23.39 mm/sec (SP mode) 11.69 mm/sec (LP mode)
NTSC: 33.35 mm/sec (SP mode) 11.12 mm/sec (LP mode)
Tape Format Tape width 12.7mm (0.5 inch)
Max. recording time PAL: 4 hours (SP mode, E-240 Tape) 8 hours (LP mode, E-240 Tape)
NTSC: 2 hours (SP mode, T-120 Tape) 8 hours (EP mode, T-160 Tape)
Rewind time Approx. 65 (±10) secs (E-180 tape)
Dimensions 360 x 82 x 230mm (W x H x D)
Weight 2.87kg
Operating temperature 5º C - 35º C
Operating humidity Less than 80%
Timer 24 hours display type
Video
Television system CCIR standard (625 lines, 50 fields)
PAL(B/G, D/K)/SECAM(B/G, D/K) colour signal
Recording format PAL/MESECAM/NTSC 3.58/NTSC 4.43
RF reception PAL B/G, SECAM B/G
RF OUT PAL G
Input level VIDEO IN (RCA) 1.0 Vp-p, 75 Ohm unbalanced
Output level VIDEO OUT (RCA) 1.0 Vp-p, 75 Ohm unbalanced
Signal to noise ratio More than 43 dBm
RF modulator UHF channel 28-68 (Adjustable)
Audio
Input level AUDIO IN (RCA)
- 6.0 dBm, more than 47 kohms
Output level AUDIO OUT (RCA)
- 6.0 dBm, less than 1 kohms
Track Mono track & Hi - Fi Track
Frequency response Normal : 100 Hz - 10 kHz (-6/+3 dBm)
Hi - Fi : 20 Hz - 20 kHz (-3/+3 dBm)
Signal to noise ratio Hi-Fi : More than 70 dB (JIS A filter)
Dynamic range Hi-Fi : More than 85 dB (JIS A filter)
You can control the sound level, input
source, and power switch of your LG
TV with the supplied remote control.
By pressing You can
TV POWER Turn the TV on or off.
TV PR +/– Scans up or down through
memorized channels.
TV VOL +/– Adjust the volume of
the TV.
TV AV Switch the TV’s input
source between the TV
and other input sources.
Controlling other TVs
with the remote control
You can control the sound level, input
source, and power switch of non-LG
TVs as well. If your TV is listed in the
table below, set the appropriate
manufacturer code.
1 While holding down TV POWER
button, press the number
buttons to select the
manufacturer code for your TV
(see the table on the right).
2 Release TV POWER button.
Code numbers of
controllable TVs
If more than one code number is list-
ed, try entering them one at a time
until you find the one that works with
your TV.
Manufacturer Code Number
LG / GoldStar 1 (Default), 2
Zenith 1, 3, 4
Samsung 6, 7
Sony 8, 9
Hitachi 4
Notes
Depending on your TV, some or all
buttons may not function on the
TV, even after entering the correct
manufacturer code.
If you enter a new code number,
the code number previously
entered will be erased.
When you replace the batteries of
the remote, the code number you
have set may be reset to the
default setting. Set the appropriate
code number again.
GC990W1_GC480W1_NA2ALL_07V 3/10/04 1:56 PM Page 15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LG GC990W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LG GC990W in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info