32932
2
Zoom out
Zoom in
Previous page
1/12
Next page
Installation
Connection of external equipment
Power
This set operates on an AC mains supply, the voltage is as indicated on the label
on the back cover. Never apply DC power to the set. In the event of thunderstorms
or powercuts, please pull out the aerial and mains plugs.
Warning
To prevent fire or shock hazard, do not expose the set to rain or moisture.
Service
Never remove the back cover of the set as this can expose you to very high
voltage and other hazards. If the set does not operate properly, unplug it and call
your dealer.
Aerial
Connect the aerial cable to the socket marked +75¥ on the back cover. For the
best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto the screen.
Care should be taken not to expose the set to any unnecessary vibration, moisture,
dust or heat. Also ensure that the set is placed in a position to allow a free flow of
air. Do not cover the ventilation openings on the back cover.
Battery installation
The remote control handset is powered by two AA type batteries. Gently pull down
the cover of the remote control handset until the battery compartment is exposed.
Install two batteries as indicated by the polarity symbols (§]and §^) marked inside
the compartment.
Note : To avoid damage from possible battery leakage, remove the batteries if you
do not plan to use the remote control handset for an extended period of time.
You can connect additional equipment, such as VCRs, camcorders etc. to your set.
Aerial socket
1. Connect the RF out socket of the VCR to the aerial socket on the back of the set.
2. Connect the aerial cable to the RF aerial in socket of the VCR.
3 . Store the VCR channel on a desired programme number using the 'Manual
programme tuning' section.
4. Select the programme number where the VCR channel is stored.
5. Press the PLAY button on the VCR.
Euro scart socket
1. Connect the Euro scart socket of the VCR to the Euro scart socket of the set.
2. Press the PLAY button on the VCR.
If your VCR outputs a switching voltage connect to Euro scart socket. If
Auto
AV On
is selected, the set will switch to AV 1 (AV) mode automatically.
Otherwise press the TV/AV button on the remote control handset to select AV
1
(AV). The VCR playback picture appears on the screen.
You can also record programmes received by the TV on video tape.
Audio/Video in sockets (option)
1. Connect the audio/video out sockets of the VCR to audio/video in sockets of
the set.
2. Press the TV/AV button to select
AV 2.
3. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Headphone socket (option)
In some models which have a headphone sockets can perform this function.
Insert the headphone plug to the headphone socket on the front panel. You can
listen to the sound through the headphone. To adjust the headphone volume,
press the
¢‚/¢”
button. If you press the
WW
button, the sound from the headphone
is switched off.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LG CB20F80X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LG CB20F80X in the language / languages: English as an attachment in your email.

The manual is 0,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of LG CB20F80X

LG CB20F80X User Manual - Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info