559942
45
Zoom out
Zoom in
Previous page
1/46
Next page
45
EXTERNAL CONTROL DEVICE SETUP
ENGENGLISH
*
Realdatamapping
00 :
Step 0
A : Step 10 (Set ID 10)
F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
64 : Step 100
6E : Step 110
73 : Step 115
74 : Step 116
CF : Step 199
FE : Step 254
FF : Step 255
23. Input select (Command: x b)
(Main Picture Input)
To select input source for main picture.
Data Structure
MSB LSB
Transmission [x][b][ ][Set ID][ ][Data][Cr]
External Input Input Number
0 0 0 0 0 0 0 0
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
External Input Data
0 0 0 0 DTV
0 0 0 1 Analogue
0 0 1 0 AV
0 1 0 0 Component
0 1 1 0 RGB
0 1 1 1
HDMI
1 0 0 0
1 0 0 1
1 0 1 0
Input Number Data
0 0 0 0 Input1
0 0 0 1 Input2
0 0 1 0 Input3
0 0 1 1 Input4
Ack [v][ ][Set ID][ ][OK][Data01][Data02][x][v][ ][NG][Data01][x]
24. 3D(Command: x t) (only 3D models)
(Depending on model)
► To change 3D mode for TV.
Transmission
[x][t][ ][Set ID][ ][Data 01][ ][Data 02]
Data Structure
Data 01 00 : 3D On
01 : 3D Off
02 : 3D to 2D
03 : 2D to 3D
Data 02 00 : Top and Bottom
01 : Side by Side
02 : Checker Board
03 : Frame Sequential
Data 03 00 : Right to Left
01 : Left to Right
Data 04 3D Effect(3D Depth): Min : 00 - Max : 14
(*transmit by Hexadecimal code)
* If data1 is 00(3D On), data4 has no meaning.
* If data1 is 01(3D off) or 02(3D to 2D), data2, data3 and data4
have no meaning.
* If data1 is 03(2D to 3D), data2 and data3 have no meaning.
X : don’t care
25. Extended 3D(Command: x v) (only 3D models)
(Depending on model)
► To change 3D option for TV.
Data 01 : 3D option
00 : 3D Picture Correction
01 : 3D Depth (2D to 3D only)
02 : 3D Viewpoint
03 : 3D Picture Size (Plasma TV only)
04 : 3D Picture Blance (Plasma TV only)
05 : 3D Optimization (Active type (LCD TV) only)
Data 02 It has own range for each 3D option determined
by Data 01.
1) When Data 01 is 00
00 : Right to Left
01 : Left to Right
2) When Data 01 is 01, 02
Data Min: 0 - Max: 14 (*transmit by Hexadecimal code)
Data value range(0 - 20) converts Viewpoint range (-10 - +10)
automatically (Depending on model)
3) When Data01 is 03
00 : Just Scan
01 : 16:9
4) When Data01 is 04
00 : Off
01 : On
5) When Data01 is 05
Data Min: 0 - Max: 02(*transmit by Hexadecimal code)
*Refer to 'Real data mapping'.
[ ][Data 03][ ][Data 04][Cr]
Ack [t][ ][Set ID][ ][OK][Data01][Data02][Data03][Data04][x]
[t][ ][Set ID][ ][NG][Data00][x]
Transmission [x][v][ ][Set ID][ ][Data 00][ ][Data 01][Cr]
Data 1 Data 2 Data 3 Data 4
00 O O X
01 X X X
02 X X X
03 X X O
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LG 37LN549C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LG 37LN549C in the language / languages: English as an attachment in your email.

The manual is 16,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of LG 37LN549C

LG 37LN549C User Manual - German - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info