601143
17
Zoom out
Zoom in
Previous page
1/20
Next page
- 15 -
Monogram embrodiery
1. Sew and fill in the monogram along the script using a slow
and smooth movement of the frame.
2. Secure the monogram by sewing a few straight stitches at the
end of the last letter, remove the material from the machine in the
usual manner.
Motive embroidery
1. First sew the outline of the motive, moving the embroidery frame
accordingly.
2. Fill in the motive from the contour to the inside then back to the
outside, until the contour has been completely filled in or embroide-
red. Place the stitches very closely together.
Notice
A long stitch is created by moving the frame more quickly,
a shorter stitch by moving the frame more slowly.
3. When you have finished, secure the work by sewing a few straight
stitches.
Changing the lamp bulb
Important
Remove the power plug
k
from the wall socket! Danger of electric shock.
1. Loosen the screw of the front cover
h
using the screwdriver
Y
as
illustrated.
2. Remove the front cover
h
from the machine.
3. Exchange the bulb of the sewing machine lighting.
4. Replace the front cover
h
and tighten the retaining screw.
Lubricating the machine
Important
Remove the power plug
k
from the wall socket! Danger of electric shock.
1. Loosen the screw from the front cover
h
and remove the front cover
h
.
2. Apply 2 to 3 drops of sewing machine oil
K
to all points indicated
in the diagram.
3. Replace the front cover
h
and insert the power plug
k
into the wall
socket.
4. After lubrication, start the machine up in rapid operation, without the
needles being threaded, for a short period to distribute the oil.
5. Remove the power plug
k
from the wall socket and remove the front
cover
h
.
6. Wipe off any superfluous oil.
7. Replace the front cover
h
and tighten the screw.
Notice
The machine should be lubricated once a week if it is being used
for more than one hour a day. Lubricate the machine daily when
it is used more frequently.
Cleaning
Dismantling of the gripper
1. Bring the needle into the highest possible position or, preferentially,
dismantle the needle.
2. Open the flap on the sewing table.
3. Remove the bobbin case by the opening its flap and then pulling
the bobbin case carrier from the bobbin case carrier pin.
4. Press the two catches
i
from the rear retainer
u
in an outward
direction and then remove the released retainer
u
.
IB_KH4001_E2719_GB_LB3-6 22.04.2008 16:50 Uhr Seite 15
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lervia KH 4001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lervia KH 4001 in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lervia KH 4001

Lervia KH 4001 User Manual - German, Dutch, French, Italian, Portuguese - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info