Zoom out
Zoom in
Previous page
Next page
For information and support, www.lenco.eu

Need help? Post your question in this forum.


Content of pages

  • Page 1

    Sportcam USER MANUAL For information and support, www.lenco.eu www.lencosportcam.com ...
  • Page 2

    Fu n ction s Thank you for purchasing this video camera. The high -performance chip is adopted for this product which has such advantages as high definition of video, strong in continuity of dynamic pictures, supporting the video format AVI and taking clear pictures. The unique ultra portable design is adopted for this video camera and it is applicable in various fields to enable your daily life convenient, safe and colorful. Make sure to read this manual carefully and keep properly for reference in the future. This user's manual has referred to the latest information during compiling. The screen display and illustrations are used in this user's manual for the purpose of introducing details of this digital camera in a more specific and direct way. Difference may arise between these displays and illustrations and the digital camera actually available for you due to difference in technological development and production batch, under which case, the actual functions of this vide ...
  • Page 3

    sensor of the video camera may be damaged.  Take good care of the video camera and prevent water or sand particles from entering the video camera when it is used on the beach or near water, because water, sand particles, dust or component containing salt may damage the video camera.  Keep the video camera contaminated free of dust and chemical materials. Place it in a cool, dry and well ventilated place. Do not place the video camera in a high temperature, moist or dusty place to avoid failure of the video camera.  Be sure to use the video camera regularly during its long time storage. P lease check if the video camera can operate normally before use.  If dirt or stain is accumulated on the video camera or on its lens, use soft, clean and dry rag to wipe it away gently. If the video camera or its lens is stained with sand particles, blow them away gently. Do not use cloth to wipe arbitrarily. Otherwise, it may scratch the surface of video camera or its lens.  If it is ...
  • Page 4

     Please back up the data if the memory card inside this digital camera is used for the first time. After that, format the memory card of this video camera at one time.  The externally installed SD and MMC cards are manufactured from precise electronic co mponents. Data may be lost or damaged under the following circumstances: 1. Improper use of the memory card 2. The memory card is bent, dropped or collided. 3. Place it under high temperature or moist environment or expose to sunshine directly. 4. Electrostatic or electromagnetic field exists around the memory card. 5. This memory card is taken out or power supply is interrupted when this camera or computer is connected to the memory card (i.e. during reading, writing and formatting). 6. Touch the metal contact surface of the memory card with fingers or metal materials. 7. The service life of the memory card expires (please replace the memory card regularly). 3 ...
  • Page 5

    Prod u ct In trod u ction  This product is small in and ease for installation.  The high-performance chip is adopted for this product which has such advantages as high definition of video, strong continuity of dynamic pictures, video recording available under low illumination level and supporting video format of AVI.  Camera shooting can support VGA (640 x 480) and HD (1280 x 720) modes.  Dimensions of 5M, 3M and 1M are available for taking pictures.  This product supports the watermark function for time and date and the videotape can display current time and date synchronously.  Support high-speed USB2.0  Support SD card of 32G to a maximum.  The recording mode of circulating coverage is adopted for this product, which can cover original pictures with new ones to keep rolling record in cycles.  This product supports the video output and the in -situ playback function. The recorded video contents may 4 ...
  • Page 6

    be inquired on the spot via vehicle-mounted displayer. Meanwhile, it supports the television and computer playback. S ystem Req u iremen ts System Requirements Microsoft Windows2000, XP, Vista, 7 Intel P entium III of more than 800MHz or other CPU with equivalent performance Internal Memory Larger than 512MB Sound Card and The sound card and display card shall support DirectX8 or higher Display Card version. CD Driver Speed of 4 times or faster Hard Disk Free space of more than 500MB Others One standard USB1.1 or USB2.0 port Operating System CPU 5 ...
  • Page 7

    In trod u ction to App earan ce an d Keyp ad 6 ...
  • Page 8

    ⑴TF card ⑻Lens ⑵Reset ⑼LCD TF T ⑶USB ⑽Working Indicator Light ⑷Key for Startup/shutdown ⑾Indicator Light for charging ⑸MIC ⑿Lanyard hole ⑹Shutter Key ⑺Mode Switch: -Taking P ictures -Video Recording -Vehicle-mounted Mode 7 ...
  • Page 9

    Usage 1. Charge the built-in lithium battery Indicator Light for charging is on. USB Cable Connect the camera with computer for charging in the shutdown state. The indicator light for charging is on at this time and will be off after charging. In general, it can be fully charged after 2 -4 hours. 2. Use of Memory Card 8 ...
  • Page 10

    1. Push the TF card into the card slot according to the concave lettering beside the slot of memory card till it is completely inserted. 2. To take out the TF card, gently press the end of the memory card inward and it will pop up. Note: No built-in memorizer is available in this video camera. Make sure to insert memory card before using. 3. Startup/Shutdown 3.1 Startup: P ress the POWER Key for 3 seconds, the screen is displayed and the camera enters the startup state. 9 ...
  • Page 11

    3.2. Shutdown: P ress the P OWER Key once under idle condition, and the camera will be shut down. . Automatic shutdown: when the idle time of the video camera reaches the time for automatic shutdown, it will be shut down automatically to save power. The default time of this camera for automatic shutdown is 5 minutes. 3.3. Shutdown in case of power shortage: when the power of the battery is insufficient, the LCD display screen will display the icon. P lease charge it in time. When the icon turns into red and flickering, the video camera will be shut down automatically. 4. Conversion between Function Modes Three modes are available for this video camera, i.e. picture taking mode, video recording mode and vehicle-mounted mode. Conversion is available via the mode switch after startup. 10 ...
  • Page 12

    Picture taking mode: pictures can be taken; Video recording mode: video can be recorded; Vehicle-mounted mode: videotape can be recorded. (one section every 5 minutes) Picture taking Video recording Mode Switch Vehiclemounted mode 5. Indicator light 11 ...
  • Page 13

    B usy light: when the camera is busy (such as, recording a film, taking photos, automatic off-screen), the busy light will be on. Charging light: when the light is on for a long time, it prompts the user that the camera is charging. 6. Video recording mode When the mode switch is turned to video mode, press the shutter button once or click the LCD center once to begin videoing under previewing state; press the shutter button once again if you want to stop videoing, and the camera will also stop videoing automatically when the memory card is full or the power is insufficient during videoing period: 1 00:12:18: Timer means that videoing can still last fo r 12 minutes and 18 seconds. 2 : mode icon represents that the camera is in videoing and recording mode at present. 3 : videoing size clicks this icon and you can choose 720P/VGA. 4 5 : means that the memory card is inserted at present. : digital zoom icon, click it and enlarge it. 12 ...
  • Page 14

    6 : digital zoom icon, click and minify it. 7 : visual shutter, click this icon for taking photos or recording. 8 : battery icon represents the present power of the battery. 9 : represents digital zoom times. 10 : click this icon to switch to the playback mode. 7 Photo mode: Switch the mode switch into the photo mode, press the shutter button or click the LCD center once under the previewing state to take a photo: 1 0/1234: Counter, indicating current number of photos taken already /number of photos to be taken. 2 : mode icon, indicating that the camera is in photo taking mode at current. 3 : video size, click this icon to select 1M/3M/5M. 4 : means that the memory is been inserted at present . 13 ...
  • Page 15

    8 5 : digital zoom icon, click it to enlarge. 6 : digital zoom icon, click it to minify. 7 : visual shutter, click this icon for taking photos or videoing. 8 : battery icon, indicates the power of the battery at present. 9 : indicates digital zooming times. 10 : click this icon to switch to the playback mode. Vehicle-mounted mode: Turn the mode switch to vehicle-mounted mode, press the shutter button or click the LCD center once under the preview state to begin recording, save a segmen t for recording every 5 minutes, then start to record the next segment of video. When the storage card is full, the earliest segment of video will be deleted to release the corresponding space for continuous recording, and so the cycle. 1 00:12:18 timer, indicating that the camera can still record for 12 minutes and 18 seconds. 14 ...
  • Page 16

    2 : mode icon, representing that the camera is in vehicle-mounted mode at present. 3 : video size, click this icon to select 1M/3M/5M. 4 : represents that the memory card is been inserted at present. 5 : digital zoom icon, click it to enlarge. 6 : digital zoom icon, click it to minify. 7 : visual shutter, click it for taking photos and recording. 8 : battery icon, representing the current power of the battery. 9 : indicates the digital zooming times. 10 : click this icon to switch into the playback mode. Note: the screen will be off automatically during recording process in order to save power; user can press the power button shortly to start the screen and restore display. 9 Playback mode: 9.1 After starting up and entering the previewing state, click the playback icon ( 15 ) at the lower right corner ...
  • Page 17

    of the LCD to switch to the playback mode: Click 1 : represents that the current file is an AVI video fil e. 2 : represents that there is one file in the current folder/one file in total. 3 : current folder name (such as: I:\DCIM\100MEDIA I: is the movable disk of the device). 4 : Means that clicking can select files frontwards. 5 : Means that clicking can select files backwards. 6 : Means that clicking can activate to confirm the deletion of the current file picture. 7 : Means that clicking can play the current movie clips. 8 : Means that clicking can switch back the previous photo mode (v ideo mode). 16 ...
  • Page 18

    9.2 Movie clips playing: Click to pause playing, click to play quickly, and click to play slowly. 9.3 File deletion: Click YES to delete the current file immediately, or click NO to cancel the deletion operation. 17 ...
  • Page 19

    Apply on the personal computer 1. Connect to personal computer The camera is provided with the plug and play function . Connect the device to the computer with USB line under turning-on state, then it will be switched into the movable hard disk mode. Icon of movable disk will appear on the window of“ my computer”. Photos/videos you have taken are saved in folder I:\DCIM\100MEDIA (I is the movable disk of this device) in the movable disk. Files recorded in vehicle-mounted mode are saved in I:\DCIM\RECORDER. Note: if movable disk function is used in windows 2000 or windows operating system with a higher edition, it is unnecessary to install drivers. 2、P C Cam Function The default mode is Removable Disk when connected to the Computer, press shutter button to switch to the P C Cam mode (the display will show “ PC CAM” marks). Install the P C Cam driver before switching to P C Cam model as following steps: Put the CD Driver into the CD-ROM of the computer, Click “ My compu ...
  • Page 20

    “ Driver.rar” to the computer, and click driver.exe to install the driver as following graphic After installed, click start-program- “ SP CA1628 P C Driver’’ in the program menu, Click icon, then enter into AMCAP window as following graphic 19 shortcut ...
  • Page 21

    Make sure to select the P review in Option menu. 20 ...
  • Page 22

    Technical parameters Image sensor Function mode Camera lens Digital zooming Shutter LCD display screen 1.3 million pixel (CMOS) videoing, taking photos, vehicle-mounted mode, movable disk, PC cam F3.1 f=9.3mm 4 times Electronic shutter 2.0-inch touch screen Image resolution 5M (2592×1944), 3M (2048×1536), 1M(1280×1024) Video resolution White balance Exposure VGA: 640x480 (60 frames/second), 720P:1280x720 (30 frames/second) Automatic Automatic Image AVI Video JPEG TF card (Supporting up to 32GB), (without build-in flash memory) High-speed USB 2.0 interface Built-in 3.7V rechargeable lithium File formats Storage medium USB interface Power Supply Dimension (length × width × height) Weight 67*48*29mm about 46.5 grams 21 ...
  • Page 23

    This symbol indicates that the relevant electric al product or battery should not be dis posed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electric al equipment or batteries. In so doing, you w ill help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive). 22 ...

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.


For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.


To achieve meaningful questions, we apply the following rules:


Register getting emails for Lenco Sportcam 100 at:

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco Sportcam 100 in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.


You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lenco Sportcam 100

Lenco Sportcam 100 User Manual - German - 26 pages

Lenco Sportcam 100 User Manual - Dutch - 29 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.