455854
30
Zoom out
Zoom in
Previous page
1/31
Next page
29
Troubleshooting
Before requesting service for this player, check the chart below for a possible cause of the
problem you are experiencing. Some simple checks or an adjustment on your part may
eliminate the problem and restore proper operation.
Symptom(Common) Remedy
No power. Insert the AC adaptor securely into the power outlet.
z Play fails to start even when
PLAY is pressed.
z Play starts but then stops
immediately.
z Condensation has formed: wait about 1 to 2 hours to allow the
player to dry out.
z This player cannot play a disc other than DVD, VCD and CD.
z The disc may be dirty and may require cleaning.
z Ensure that the disc is installed with the label side up.
No picture. Ensure that the equipment is connected properly.
z No sound.
z Distorted sound.
z Ensure that the equipment is connected properly.
z Ensure that the input setting for the TV and stereo system are
correct.
z Adjust the master volume to a suitable volume by rotating
the volume knob at the side of the player.
Picture is distorted during rapid
advance or rapid reverse.
The picture will be somewhat distorted at times: this is normal.
No rapid advance or rapid
reverse play
Some discs may have sections which prohibit rapid
advance (or rapid reverse.)
No operations can be
performed with the remote
control unit.
z Check the batteries are installed with the correct polarities.
z The batteries are exhausted: replace them with new ones.
z Point remote control at the remote control sensor and operate.
z Operate the remote control unit at a distance of not
more than 6 m from the remote control sensor.
z Remove the obstacles between the remote control and
remote control sensor.
No key operation (by the main
unit and/or the remote control
unit) is effective.
Disconnect the power adaptor and then reconnect it. (The player
may not be operating properly due to lightning, static electricity or
some other external factor.)
Symptom [DVD] Remedy
Play does not start even
when title is selected.
Confirm the region code setting is right.
Audio soundtrack and/or
subtitle language is not the
initial settings.
If the audio soundtrack and/or subtitle language does not exist on
the disc, the language selected at the initial settings will not be
seen/heard.
No subtitles.
z Subtitles appear only with discs which contain them.
Subtitles are cleared from the TV monitor, perform the
steps display the subtitles.
Alternative audio soundtrack
(or subtitle) languages fail to
be selected.
z An alternative language is not selected with discs which
do not contain more than one language.
z In the case of some discs, the alternative language can not be
selected by operating the LANGUAGE or SUBTITLE button. Try
selecting it from the DVD menu if one is available.
Angle cannot be changed.
This function is dependent on software availability. Even if a disc has
a number of angles recorded, these angles may be
recorded for specific scenes only.
- To be continued
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco MES 216 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco MES 216 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lenco MES 216

Lenco MES 216 User Manual - German - 31 pages

Lenco MES 216 User Manual - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info