Manual Lenco MCI-400 (page 4 of 59) (English, German, Dutch, French, Spanish)

477354

Zoom out

Zoom in

1/59

II) WIRE CONNECTION

1) CONNECT THE END OF THE SPEAKER CABLE

TO THE SPEAKER OUT TERMINAL (RED & WHITE HEAD)

(25) AT THE BACK OF MAIN UNIT, ANOTHER

TERMINAL CONNECT TO THE SPEAKER CLIP OF THE

SPEAKER BOX BACK SIDE(RED COLOR OF SPEAKER

CABLE TO RED COLOR OF SPEAKER CLIP)

2) CONNECT ONE END OF THE RCA CABLE (YELLOW

HEAD)

TO THE SUB-WOOFER OUT JACK (27) AT THE BACK OF

MAIN UNIT TO THE SUB-WOOFER IN JACK (31) AT THE

BACK OF THE SUB-WOOFER

3) CONNECT THE 75 OHM ANTENNA JACK(26) VIA A 75

OHM

CABLE(NOT PROVIDED) TO GET THE FM RECEPTION

III) POWER SUPPLY

CONNECT THE AC POWER CORD FROM THE MAIN UNIT(28) AND AC POWER CORD FROM SUB-WOOFER UNIT(30)TO

THE MAIN POWER SUPPLY FROM YOUR HOME AREA. TURN ON THE ON/OFF BUTTON AT MAIN UNIT (15) AND POWER

ON THE SUB-WOOFER (14) RESPECTIVELY. IF THE LCD DISPLAY (2) AND THE POWER LED (14) IS LIGHT UP WITH

BLUE LIHGT. IT MEANS THE SYSTEM IS NOW READY TO PLAY THE MUSIC.

SETTING THE CLOCK

1. SET UNIT IN STANDBY MODE.

2. PRESS THE “MEM/CLK-ADJ” BUTTON (17) ONCE, THE LCD DISPLAY (2) WILL SHOW “ 24 HR “. PRESS SKIP

SKIP BUTTON (10) TO SELECT THE APPROPIATE AREA HOUR FORMAT(12HR/24HR). PRESS “MEM/CLK-ADJ”

BUTTON (17) AGAIN TO CONFIRM.

3. THEN FIRST DIGIT OF “0:00” ON DISPLAY(2)(IF SELECT 24HS MODE) IS FLASHING. PRESS SKIP

OR SKIP

BUTTON (10) TO SET THE CORRECT HOUR. PRESS ”MEM/CLK-ADJ” BUTTON (17) TO STORE THE CORRECT

HOUR.

4. THE THIRD & FOURTH DIGIT OF “0:00” IS FLASHING, PRESS THE SKIP

OR SKIP BUTTON (10) TO SET THE

CORRECT MINUTES. THEN PRESS “MEM/CLK-ADJ” (17) TO STORE THE CORRECT MINUTE.

¾ THE PRE-SET TIME WILL BE RE-SET COMPLETELY IF DIS-CONNECTING THE MAIN POWER SUPPLY.

YOU ARE RECOMMENDED TO SWITCH THE SYSTEM INTO STANDBY MODE FOR CONVENIENCE

USAGE.

LISTENING TO RADIO

MANUAL TUNING

1. PRESS FUNCTION BUTTON (16) TO SELECT “ TUNER ” MODE.

2. TUEN TO THE DESIRE STATION BY PRESSING THE SKIP/TUNE

OR SKIP/TUNE BUTTON (10).

3. ADJUST THE MAIN VOLUME CONTROL (3) AND SUB-WOOFER VOLUME (29) TO THE DESIRED VOLUME AND BASS

EFFECT LEVEL.

AUTO TUNING

1. PRESS FUNCTION BUTTON (16) TO SELECT “ TUNER ” MODE.

2. PRESS AND HOLD THE SKIP/TUNE

OR SKIP/TUNE BUTTON (10) FOR 1-2 SECONDS AND THEN

RELEASE.

3. THE UNIT WILL START SEEKING AUTOMATICALLY AND STOP UNTIL A RADIO STATION IS REACHED.

4. REPEAT STEP 3 & 4 UNTIL THE DESIRED RADIO STATION IS BEING REACHED.

5. ADJUST THE MAIN VOLUME CONTROL (3) AND SUB-WOOFER VOLUME (29) TO THE DESIRED VOLUME AND BASS

EFFECT LEVEL.

E-4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco MCI-400 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 5,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco MCI-400 Manual

Product: