601613
6
Zoom out
Zoom in
Previous page
1/8
Next page
PLAYBACK OF MP3 SONG VIA USB STORAGE MEDIA OR MEMORY CARD
CONNECTING
THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 FILE WHICH STORED IN THE MEMORY MEDIA
WITH USB CONNECTING PORT, MULTI
-
MEDIA CARD (MMC) OR SECURE DIGITAL (SD) MEMORY CARD.
1.
PRES
S FUNCTION BUTTON (5) TO SELECT CARD-USB MODE.
2.
OPEN THE USB/CARD SLOT COVER (19)
3.
PLUG
-IN THE USB PLUG WITH THE FACE UP & MAKE SURE IT GOING INTO
COMPLETELY OR INSERT THE MEMORY CARD IN THE DIRECTION OF THE
ARROW AS SHOWN IN THE LABEL ON THE UNDERSIDE OF THE MEMORY
CARD SLOT COVER. INSERT STRAIGHT WITHOUT BENDING.
CONNECTING THE USB / MEMORY CARD UPSIDE DOWN OR BACKWARDS
COULD DAMAGE THE AUDIO SYSTEM OR THE STORAGE MEDIA (USB /
MEMORY CARD). CHECK TO BE SURE THE DIRECTION IS CORRECT BEFORE
CONNECTION
.
4.
THE SYSTEM WILL START READING THE STORAGE MEDIA AUTOMATICALLY AFTER CONNECTING, AND
LCD DISPLAY (1) WILL SHOW THE TOTAL NUMBER OF MP3 FILES AND TOTAL NUMBER OF ALBUM BEING
DETECTED.
5.
REPEAT THE SAME PLAYBACK PROCEDURE AS PLAYING CD/MP3 DISC AS ABOVE
REMA
RK
-
THE SYSTEM CAN READ EITHER ONE OF THE STORAGE MEDIA ONLY. IF BOTH THE USB TYPE AND
MEMORY CARD TYPE STORAGE MEDIA HAVE BEEN CONNECTED, THE SYSTEM WILL READ THE MEMORY
CARD TYPE ONLY. OR THE ONE WHICH CONNECTING TO THE SYSTEM FIRST AT CARD-USB MODE
- T
HE SYSTEM CAN DETECT AND READ THE FILE UNDER MP3 FORMAT ONLY THOUGH THE USB
PORT/MEMORY CARD SLOT.
-
IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET,
DUE TO VARIANCES IN MP3 ENCODING
FORMAT
, SOME
MP3 PLAYER
MAY NOT
BE ABLE TO PLAY
VIA THE USB SOCKET
.
IN THESE CASES
PLEASE USE THE MP3 PLAYER CONNECTED TO THE AUX
-
IN SOCKETS
AT
THE REAR OF THE UNIT
.
REMOVING OF USB / MEMORY CARD
TO REMOVE THE USB / MEMORY CARD, TURN OFF THE POWER OR SWITCH THE FUNCTION MODE TO EITHER
CD, AUX OR TUNER FIRST. FOR USB PORT
UN
-
PLUG IT BY PULLING OUT THE USB SOCKET DIRECTLY, FOR
MEMORY CARD
PRESS THE MEMORY CARD INWARD & THEN RELEASE, NOW THE CARD BEING PARTIALLY
EJECT AND YOU CAN REMOVE IT BY HAND.
MORE FEATURES
A. SLEEP SETTING (BY REMOTE CONTROL)
1.
PRESS SLEEP BUTTO
N AND SLEEP INDICATOR SHOWN ON THE LCD (
1
).
2.
KEEP PRESSING THE BUTTON TO ADJUST THE SLEEP TIMER IN THE ORDER OF 90 > 80 >70 .10 MINUTES.
3.
SYSTEM WILL STOP AND GOTO STANDBY MODE AUTOMATICALLY AFTER THE SELECTED TIMING.
4.
TO CANCEL THE SLEEP MODE, PRESS SLEEP BUTTON UNIT IT REACH 0 MINUTES.
B. ALARM CLOCK SETTING (BY REMOTE CONTROL)
THIS FUNCTION ALLOWS THE SYSTEM TO TURN ON AUTOMATICALLY AND WAKE YOU UP BY SOFT MUSIC OR
RADIO.
FIRST, PRESS AND HOLD THE TIMER BUTTON TO ENTER THE PROGREM MODE UNTIL THE TIME IS
FLASHING ON LCD DISPLAY, THEN YOU CAN START THE ALARM SETTING:
-
1) ON TIME SETTING : PRESS THE SKIP UP/DOWN BUTTON TO SET THE TIME. THEN PRESS AGAIN TIMER
BUTTON TO ENTER OFF TIMER MODE
2) OFF TIME SETTING
: PRESS THE SKIP UP/DOWN BUT
TON TO SET THE OFF TIMEER. THEN PRESS
TIMER BUTTON AGAIN TO ENTER WAKE UP MODE.
3) WAKE UP MODE : PRESS SKIP UP/DOWN TO SET THE WAKE UP MODE (CD OR TUNER). THEN PRESS
TIMER BUTTON TO ENTER THE VOLUME MODE.
4) VOLUME LEVEL : PRESS SKIP UP/DOWN BUTTON TO SET THE VOLUME LEVEL, THEN PRESS TIMER
BUTTON AGAIN TO COMPLETE THE SETTING.
ACTIVE/DE
-
ACTIVE TIMER FUNCTION
1.
PRESS THE TIMER BUTTON ON REMOTE HANDSET, THE PRESET TIME AND THE TIMER INDICATOR
IS SHOWN ON LCD DISPLAY (1
).
2.
TO CANCEL ALARM FUNCTION BY PRESS AGAIN TIMER BUTTON UNTIL THE TIMER INDICATOR
DISAPPEAR.
E-5
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco MC-4100 USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco MC-4100 USB in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lenco MC-4100 USB

Lenco MC-4100 USB User Manual - German - 16 pages

Lenco MC-4100 USB User Manual - Dutch - 10 pages

Lenco MC-4100 USB User Manual - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info