477353
6
Zoom out
Zoom in
Previous page
1/7
Next page
More features
A. Sleep function
1. Press the “ Sleep ” button on the remote control. “SLP-90 “ will be shown on the LCD display (3).
2. Repeatedly press this button to adjust the sleep timer in the order of 90 > 80 > 70 >….10 minutes respectively. The sleep
icon “ ” will be shown on the LCD display.
3. The system will stop and go to standby mode automatically after the selected time.
4. To cancel the sleep mode, press the “ Sleep button until “SLP-off’ is being displayed and the “ “ indicator disappears
from the LCD display.
B. Alarm clock setting
This function allows the system to turn on automatically and wake you up by CD , Tuner, USB or SD mode respectively.
1. Press and hold the Alarm ” button(6) to enter the alarm setting mode. The first digits of the clock will flash together with
the alarm icon .
2. Press Skip Up / Down button (19) to set the hour. Next press the “ Alarm ” button (6) again to confirm.
3. Press the Skip Up / Down button (19) to set the minutes and press the Alarm button (6) to confirm the
alarm time.
4. Press the Skip Up / Down button (19) to select the wake up mode(TUNER/CD/USB/SD CARD) and press
the “ Alarm “ button (6) to confirm.
5. Press the “ Volume “ button (4) to adjust the wake up volume level.
6. Press the “ Alarm “ to complete the alarm setting.
Remarks:
If there is no music source being detected (such as CD or USB) when the alarm time is reached, the system will go to
“ Tuner ” mode automatically. The system will play the previous selected radio frequency.
In “ Tuner mode “ wake up, the system will play the previous selected radio frequency.
The programming mode will automatically stop if no button is being pressed in a period of about 4 seconds.
During the “alarm on” mode, pressing the “On/Standby“ button(10) will switch off the system.
Active/de-active timer function
1. To activate the alarm function, press the “ Alarm ” button (6) repeatedly until the alarm indicator is shown on the
LCD display (7).
2. To cancel the alarm function, press again the “ Alarm” button (6) until the alarm indicator ” disappears.
C. Mute function (on Remote)
Press to terminate the sound output from speakers temporarily and press again to resume normal playback. When active, the
“MUTE” indication will continue flashing on the LCD display.
D. Pre-set EQ function
This unit provides 4 different sound modes to enhance your listening experience. You can select the desired effect by pressing
the “ Preset EQ ” button (11) repeatedly in the following sequence:
FLAT CLASSIC ROCK POP JAZZ
E. Display time function
Press the “ Display/ID3 “ button (8) when the unit is on at any mode. The LCD display (3) will show the current time.
F. Snooze function
During the alarm on mode, press the Snooze button(7) once to terminate the alarm mode temporarily. The unit will alarm
again after 9 minutes. To cancel the alarm, press the Alarm (6) button or the “ On/Standby “ button (10) while the system is on.
Aux-in connection
Connect another audio device, e.g. (portable) CD player, MP3 player, (portable) cassette player, etc. to this system with an
audio cord with RCA plugs (not supplied).
Connect one end of this cord to the external device and the other end to the Aux-in jack (24) on the back of the unit.
When connected, select the Aux mode by the “ Function “ button (5).
E-5
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco MC-146 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco MC-146 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lenco MC-146

Lenco MC-146 User Manual - German - 10 pages

Lenco MC-146 User Manual - Dutch - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info