601902

Lenco LUCILLE Manual

6
Zoom out
Zoom in
Previous page
1/8
Next page
EN-5
Bluetooth Operating
This unit can receive stereo audio signal from a Bluetooth stereo audio source device.
1. Power on the unit. Switch to Bluetooth mode by pressing the FUNCTION button repeatedly.
2. “PAIRING” flashes on the display while Bluetooth is pairing.
3. Enable the Bluetooth function of the Bluetooth audio source device.
4. Pair and connect to LENCO-LUCILLE (this unit) on the audio source device. If prompted for
passcode, enter “0000”.
5. When pairing is successful, “CONNECT” shows on the display, and it is ready to stream music. Press
the ENTER/PLAY/PAUSE button on the unit if the playback does not start automatically, or operate
the audio source device to start playback.
6. During playback, press the ENTER/PLAY/PAUSE button to cease or resume the playback.
7. During playback, turn the TUNING/SKIP knob clockwise/anticlockwise to skip to the next/previous
track.
Note: The above steps for Bluetooth connection and playback are intended for reference purpose only.
Please refer to the instruction manual of the Bluetooth audio source device for more details.
Disconnection/Reconnection to the Bluetooth Audio Source
Press the POWER button to turn off the unit, and to disconnect the Bluetooth device.
Turn on the unit and switch to Bluetooth mode to automatically retrieve the last paired Bluetooth device.
Note:
y
When the external Bluetooth source device is moved out of the Bluetooth receiving range of the unit,
the Bluetooth connection will be disconnected. Moving again into the receiving range will resume
connection and restart playback through the unit automatically. If otherwise the connection does not
resume automatically, please operate as above to reconnect and start playback.
y
Simultaneous connection of two external Bluetooth audio devices to the unit is not supported. First
press and hold the MENU/BLUETOOTH PAIR button on the unit (or operate your audio source
device) to disconnect current connection, at the same time the unit will launch a new pairing, now
you can operate another audio source device to make Bluetooth connection with the unit and start
playback.
NFC (Near Field Communication)
This unit has NFC function, which allows an NFC-enabled Bluetooth audio source device to rapidly
connect with the unit and play the audio signal through the unit. Operate as below:
1. Turn the unit on. Activate the NFC function of a Bluetooth audio source device such as a
smartphone.
2. Hold the audio source device close to the NFC scanning area of the unit (in a range within 10cm).
The audio source device will pair and connect with the unit instantly. If the unit is in other modes, it
will be switched to Bluetooth mode automatically.
3. Operate the audio source device to select your desired music to play through the unit. Please refer to
the instruction manual of your NFC audio source device for more details.
USB Charging Port
The USB charging port on the back of the radio is only used to output a 5V/1A current to a USB external
device for charging when the unit is switched on.
IMPORTANT SAFETY INSTRUCTIONS
y The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
y When the AC/DC adapter is used as the disconnect device, the disconnect device shall remain
readily operable. To be completely disconnected the power input, the AC/DC adapter shall be
disconnected from the mains completely.
y No naked flame sources, such as lighted candles, should be placed on the apparatus.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco LUCILLE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco LUCILLE in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lenco LUCILLE

Lenco LUCILLE User Manual - German - 8 pages

Lenco LUCILLE User Manual - Dutch - 8 pages

Lenco LUCILLE User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info