Manual Lenco L-82 (page 3 of 36) (English, German, Dutch, French, Italian)

477295

Zoom out

Zoom in

1/36

ASSEMBLY

Drive belt:

The belt and turntable platter have been installed properly at factory, but the belt

may be loose during transportation. If so, the following procedures will be taken for

belt installation by yourself.

A. Remove the rubber mat from the turntable platter and the E ring from the

turntable shaft, then release the turntable platter from the shaft

B. Put the drive belt on the inner rim of the turntable platter and pull it through the

hole

C. Hold the belt with your fingers and place the belt onto the motor pulley as

shown in the drawing.

D. Clip the E ring on the shaft and place the rubber mat onto the turntable platter.

Caution:

1. Make sure that the drive belt is not twisted or distorted.

2. Avoid oil. Oil splashes will make the belt slippery.

Auto Return Reset:

Always do the reset for Auto Return once you move this product. The mechanism

of Auto Return will rotate irregularly when moving and it will cause the malfunction

of Auto Return. The following steps will reset the mechanism to normal.

1. Place a record on the platter and play it.

2. Manually lever the tone arm and place it to the blank part of the end of the

record.

3. The mechanism of Auto Return function will be adjusted properly and the tone

arm will automatically return to the arm rest.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco L-82 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco L-82 Manual

Product: