477341
10
Zoom out
Zoom in
Previous page
1/10
Next page
Problem Possible cause Solution
Volume in the operating system
is set too high.
Check the volume of the operating
system, and reduce it if necessary.
Distortion from the audio source. The sound quality of .WAV and .MID
files is often poor, so that distortion
and noise are likely when high-power
loudspeakers are used. Try another
audio source, such as a music CD.
Volume in the operating system
is set too high.
Check the volume of the operating
system, and reduce it if necessary.
Battery power is insufficient
when the unit is not plugged into
an external power supply
Recharge or replace the battery, or
plug into an external power supply.
The unit is too close to a radio
tower.
Move the loudspeakers to see if the
interference disappears. You can buy
a shielded cable at your local
electronics store.
The remote control is beyond the
effective control range.
Move the remote control into the
effective control range.
There is a blocking object
between the IPD-4500 system
and the remote control.
Move the blocking object or move the
remote control to within the effective
control range without anything
blocking it.
The remote control
does not work.
The remote control battery is
dead.
Replace the battery (See the quick use
guide for details concerning the
procedural steps).
Problem Possible cause Solution
Direct exposure to sunlight or
other light (coming from the
inverter-type fluorescent lamp)
affects the sensor of the remote
control of this machine.
Reposition the IPD-4500 system
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco IPD-4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco IPD-4500 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lenco IPD-4500

Lenco IPD-4500 User Manual - German - 10 pages

Lenco IPD-4500 User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info