61790
30
Zoom out
Zoom in
Previous page
1/32
Next page
30
This troubleshooting guide may help you find a possible cause of and solution to a problem. If there are still
problems, please contact the local service centre or distributor.
Common sympton Possible cause Remedy
No function Mains power is not connected Connect to the mains power
outlet
Power is OFF Turn the power ON.
No playback No disc is inserted Insert a disc.
("no disc" will be shown on screen).
Disc is upside down. Reload disc.
("no disc" will be shown on screen). The label side should face
upward.
Dirty disc Clean disc surface.
Deformed/scratched disc Replace disc.
Condensation in unit Turn power on for 1-2 hours
before using the unit.
No sound Wrong audio output setting Check audio output setting
Sound in one or more Poor or missing cable connection Check connections
Speaker(s) is missing
No sound in centre/ Downmix settings are wrong Change downmix settings
surround speakers Disc or TV program is recorded Set prologic II on.
in stereo
Sound on scart connector Sound in scart connector is Volume Turn the volume up to max..
is very weak or missing regulated. (Can only be used without
speakers connected)
No picture Disconnection of video equipment Check the video connections
Wrong output setting of the video output Check the video output setting of
Video output in general setup
PROBLEMS AND POSSIBLE SOLUTIONS
TROUBLESHOOTING
Our DVD players support both burned and original discs, however we reserve the right to refuse faults,
which concern the use of burned discs.
There are some general things, which we recommend you to check before you return your product for
service.
1. Use only discs of high quality.
There is a large range of bad quality discs on the market.
Low quality discs can cause faults during the action of burning a CD or DVD-disc,
which will affect the replay of the disc.
2. Make sure the disc is clean and in no way damaged (also apply for original discs).
3. Check if the burning was done correctly perhaps burn a new disc at low burning speed (x.1)
4. Check if your product supports the disc-format (ex. DVD-R or DVD+R) or file-format (ex. DivX), which you
Use.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco DVD-517 H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco DVD-517 H in the language / languages: English as an attachment in your email.

The manual is 6,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lenco DVD-517 H

Lenco DVD-517 H User Manual - German - 195 pages

Lenco DVD-517 H User Manual - Dutch - 43 pages

Lenco DVD-517 H User Manual - French, Spanish - 195 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info