477314

Lenco CS-420 Manual

2
Zoom out
Zoom in
Previous page
1/51
Next page
1
LOCATION AND FUNCTION OF CONTROLS
1. RELEASE BUTTON
Press the REL button to release the front control panel from the unit chassis, then pull it up a little to
remove from the unit chassis.
When the front control panel is removed the LED indicator flashes.
2&3&4. SEL BUTTON (Select) AND VOL+/VOL- BUTTONS
a) Press the SEL button briefly, it is activated as selecting each mode of E. VOL.
-> VOL ->BASS ->TRE -> BAL -> FAD->
When selecting a desired E.VOL mode, press the VOL+ or VOL- button to adjust.
In each mode, the waiting time is about 5 seconds, and the waiting time is over, it returns to the last
display mode .
The mode of E.VOL is operated with following numeric display.
- VOL: MIN(00), 01,......46, MAX(47).
- BASS/TRE: -07, -06,...,00,...+06,+07
- BAL: 0LR9, 1LR9, ..., 9LR9,..., 9LR1, 9LR0
- FAD: 0FR9,1FR9, ..., 9FR9,..., 9FR1, 9FR0
b) Press SEL button and hold for more than 2 seconds to turn on TA SEEK/TA ALARM mode, then press
SEL button shortly and repeatedly to select PI SOUND/PI MUTE, RETUNE L/RETUNE S, MASK
DPI/MASK ALL, BEEP ON/BEEP OFF, USER SET
(FLAT/CLASSIC/ROCK/POP),VOL LAST/VOL DEFA ,
STEREO/MONO(in RADIO mode), LOUD OFF/LOUD ON,DX/LOCAL (in RADIO mode), CLK
ON/CLK OFF, CLK 12/24 mode.
After selecting a desired mode, press the VOL- or VOL+ button to select one setup item of the desired
mode.
1) TA SEEK/TA ALARM:
TA SEEK mode: when newly tuned station does not receive TP information for 5 seconds, the radio
retunes to next station which has not the same station (PI) as the last station, but has the TP
information.
When TP information gets lost at the current station for retune time which is set by RETUNE
SHORT(90 seconds) or RETUNE LONG(150 seconds), the radio start to retune to next same PI
station. When same PI station does not catch in 1 cyclic search, the radio retunes to next station with
TP information.
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco CS-420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco CS-420 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info