455819
10
Zoom out
Zoom in
Previous page
1/13
Next page
10
SLEEP To Music Timer
You can program the sleep timer to play the radio for up to 99” minutes and then shut off
automatically.
1.) Press the SLEEP button. The display will briefly show L:30and the radio will begin to play.
After 30 minutes the radio will shut ‘Off’ automatically.
2.) To increase or decrease the amount of time that the radio will play before shutting off, hold the
SLEEP button and press either the SET < or > button to change the display to the desired
sleep time, up to a maximum of “99minutes or a minimum of 01” minute.
NOTE: When you change the sleep timer from the 30 minute default setting to a different
setting, the new setting becomes the default setting. Whenever you activate the sleep timer it
will begin with your new default setting and count down to zero from that point.
3.) To cancel the sleep timer before it counts down to “00” and shut the radio ‘Off’ immediately by
pressing RADIO ON/OFF button or pressing the SNOOZE/SLEEP OFF Bar.
IMPORTANT: Remember that the station and volume settings you choose for the SLEEP To
Music operation are the same settings you will hear if you set the alarm for wake to radio the
following morning.
Display Brightness Control
This automatic time setting
Clock Radio features a unique display brightness control system that
gives you three convenient options:
HIGH When the dimmer switch is set to the “HIGH” position the clock display is always at
full brightness. The dimmer switch was set to the ‘High’ position at our factory.
LOW When the dimmer switch is set to the LOW position the display brightness is
reduced by approximately 50%.
OFF/WAVE – When the dimmer switch is set to the OFF/WAVEposition the display goes ‘Off’
completely. This is designed for people who prefer to sleep in total darkness.
However if you want to see the clock display at any time, slowly wave your hand in
front of the WAVE SENSOR on the front panel. The clock display will immediately
return to full brightness for 10 seconds and then shut off again automatically. The
effective operating range of the Wave Sensor is approximately 12” to 36” from the
front panel.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco cr 334 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco cr 334 in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lenco cr 334

Lenco cr 334 User Manual - German - 13 pages

Lenco cr 334 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info