481619

Lenco BTT-6 Manual

8
Zoom out
Zoom in
Previous page
1/15
Next page
8
Establishing a Bluetooth® connection
Bluetooth® LED indicator information:
The Bluetooth® LED will burn continuously if the device is searching for a Bluetooth® device.
The Bluetooth® LED will blink if it is paired with a Bluetooth® device.
The Bluetooth® information of this product is:
Name: Lenco
Password / PIN: 0000
Before you start the configuration of the Bluetooth® connection, make sure that the
Bluetooth® module on your smartphone or tablet is turned on.
Important note: Some Bluetooth® devices might not be compatible with this device.
Turn on the tower by pressing the standby button on the remote control or tower.
Go to Bluetooth® mode by pressing the BT button.
Wait until the Bluetooth® indicator LED burns continuously.
Search for Lenco on your smartphone or tablet and connect with it.
If the pairing is successful the Bluetooth® indicator LED starts blinking.
Auto-pairing: When the Bluetooth® connection is lost, you can turn the device off and on to
reconnect with the last paired smartphone or tablet. You can also switch to AUX mode by
pressing the AUX button on the remote control or tower and then switch back to Bluetooth®
mode by pressing the BT button on the remote control or tower.
Manual pairing: If you would like to pair/connect to another smartphone or tablet, press the
BT button to enter Bluetooth® mode. In the first 30 seconds the device will search for the last
paired Bluetooth® device. After these 30 seconds you can follow steps 4 and 5 to pair
another smartphone or tablet.
Note: If the tower cannot find any Bluetooth® device for an hour, the tower will automatically shut
down.
Basic operation
Use the standby button on the tower or remote control to turn the unit on and
off.
Volume + / - buttons on the tower or remote control. Press + to increase the
volume, press - to decrease the volume.
Mute button on the tower or remote control. Press this button to turn off the
volume. Press it again to turn on the volume.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco BTT-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco BTT-6 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lenco BTT-6

Lenco BTT-6 User Manual - German - 16 pages

Lenco BTT-6 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info