1. Press with a finger on point A and press with a finger on point B.
2. Carefully pull the needle (orange part) with your other hand into the
direction of arrow 1 to disconnect it from the cartridge (make sure there is
enough counter pressure with finger A+B).
3. Remove the plastic protection cover from the new cartridge and carefully
remove the needle.
4. Press with a finger on point A and press with a finger on point B.
5. Carefully push the needle (orange part) with your other hand into the
opposite direction of arrow 1 to connect it with the cartridge (make sure
there is enough counter pressure with finger A+B).
For information and support, www.lenco.eu
Or contact us by e-mail: service@lenco.eu by phone: +31 77 323 71 36
A
B
1
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Lenco 3807 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Lenco 3807 in the language / languages: English as an attachment in your email.
The manual is 0,06 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.