15411
50
Zoom out
Zoom in
Previous page
1/54
Next page
Integral exposure metering: center-weighted mean of
full-field measurement.
Measuring range of exposure meter: Selective mode from
0.25 cd/m
2
to 125 000 cd/m
2
at f/1.4, i.e. from Ev +1 to
+20 for ISO 100/21° film, or from 1s at f/1.4 to '/
2000
s at
f/22.
Integral mode from 0.063 cd/m
2
to 125000 cd/m
2
at f/1.4,
i.e. from Ev -1 to + 20 for ISO 100/21° film, or from 4s at
f/1.4 to 1/2000s at f/22.
Film-speed range: ISO 12/12° to ISO 3200/36°.
Exposure override: From + 2 to -2 aperture stops, with
click-stops for 1/3 values. The viewfinder warning dis-
play indicates override in use. At the extremes of the ISO-
scale, the use of override is strictly limited.
Power supply: Two silver oxide button cells or lithium
cell. Press test button to check battery voltage.
Viewfinder system: Built-in pentaprism. Five inter-
changeable focusing screens.
Viewfinder eyepiece: Setting ring for adjustment from +2
to -2 diopters. Built-in eyepiece shutter. Eyepiece mount
with mount for supplementary correction lenses, eyecup,
and 90°-viewfinder attachment.
Viewfinder field: 23 x 34.6mm, i.e. 92% of frame size.
Viewfinder magnification: 0.8x at 0 diopter with 50 mm
lens.
LED display in viewfinder aligned below viewfinder
image.
Data displays in viewfinder: the aperture set on the lens;
the shutter-speed selected.
Supplementary viewfinder light may be switched on in
poor ambient light for projected viewfinder display of
shutter-speed and aperture; activated only when exposure
meter is switched on.
LED display when exposure meter is activated: symbols
indicate exposure metering mode selected, shutter-
speed/aperture balance; blinking flash symbols indicate
'flash ready' and exposure check.
LED warning indicators in viewfinder: for override and
low-light warning (insufficient light for exposure
metering)
Electronic flash synchronization: Standard X coaxial
contact socket adjacent to prism housing, for bulb and
electronic flash units. Central X hot-shoe contact.
TTL flash-exposure control: with electronic flash units
compatible with 300 or 500 SCA (system camera adap-
tion) i.e. SCA 300 or 500 dedicated flash units with SCA
351 or 551 adapters, flash exposure is measured through
the lens used.
Shutter-speed setting for synchronized flash: X =
1
/
100
s,
all settings from 1 s to l/60 s, and B.
Override for TTL flash-exposure control: plus/minus
two aperture stops with 1/3 click-stops; simple one-hand
control. Viewfinder displays override warning.
Photocell for TTL flash-exposure control: Silicon photo-
diode, next to photocell of exposure meter, protected from
stray light in lower part of camera.
Not For Resale – Free Download at http://homepage.ntlworld.com/joechan/manuals
47
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica R6.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica R6.2 in the language / languages: English as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info