495524
21
Zoom out
Zoom in
Previous page
1/21
Next page
Installation of the machine - Service Provider Manual
ENGLISH
11.6 Exiting programming mode
To exit programming mode, the following screen should
be displayed by pressing the “C” button.
3.
Exit
When the screen is displayed, press the “ENTER” but-
ton.
3.
Exit
12 CLEANING THE MACHINE
All the operations described in chapter
12 must be performed exclusively by the
service provider or specialised technician,
who shall organise all operating sequences and em-
ploy suitable means to ensure strict compliance with
safety regulations in force.
Warning. Before undertaking any mainte-
nance and/or cleaning operation, turn off the
machine, unplug it and wait for it to cool down.
12.1 Cleaning the brew unit
Warning. The brew unit contains sharp
points to enable piercing of the capsules.
Care should be taken when operating on this unit.
The brew unit should be cleaned every week. This en-
sures optimal operation of the machine. To clean the
brew unit, proceed as follows:
Remove the lower grill from the machine.
Remove the coffee grounds drawer from the machine.
Unlock the service door using the key supplied.
Open the service door
Press the PUSH button and remove the brew unit, pul-
ling it outwards.
Wash the brew unit with hot water, without detergents.
Do not use the dishwasher to wash the brew
unit.
After washing the brew unit, return it to its seat. Without
pressing the PUSH button, rmly push the brew unit to
position it in its seat.
13 DISPOSAL OF THE MACHINE
The waste materials resulting from the dismantlement
of the machine must be disposed of in such a way as
to safeguard the environment and avoid polluting soil,
water and air.
In all cases it will be necessary to comply with the ap-
plicable local laws.
Render the machine unusable by cutting the power
supply cord.
At the end of its life take the machine to a suitable wa-
ste collection facility.
Important.
The battery on the electronic card must be
removed prior to disposal of the appliance. The bat-
teries must be safely disposed of.
This product complies with EU Directive 2002/96/EC.
The symbol
on the product or on its packa-
ging indicates that this product may not be treated as
household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical
and electronic equipment.
By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences for
the environment and human health, which could other-
wise be caused by inappropriate waste handling of
this product. For more detailed information about re-
cycling of this product, please contact your local city
of ce, your household waste disposal service or the
shop where you purchased the product.
11.5 Changing a parameter
All editable parameters can be changed with great
ease.
When the page showing the value to be changed is
shown, press the “ENTER” button.
1.2.1.
Std temperature
100
Warning! When one of the machine’s ope-
rational parameters is changed, it should
be noted that this is a change to the operational
parameters set by the manufacturer for optimal
performance of the machine.
The value is made editable, and the symbol “
” appe-
ars under the digit to be edited.
1.2.1.
Std temperature
100
^
Press one of the two buttons to change the value.
When the desired value is shown, press “ENTER” to
con rm.
1.2.1.
Std temperature
100
^
The value is saved and the next digit is made edita-
ble.
If necessary, change the value of the next digit using
the “
” or “ ” button.
When the desired value is shown, press “ENTER” to
con rm.
The value is saved and the next digit is made edita-
ble.
1.2.1.
Std temperature
100
^
If necessary, change the value of the next digit using
the “
” or “ ” button.
When the desired value is shown, press “ENTER” to
con rm.
The “
” symbol disappears and the values entered be-
come active only upon exiting programming mode.
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lavazza LB2300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lavazza LB2300 in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info