495520
11
Zoom out
Zoom in
Previous page
1/16
Next page
EN
19
SOLUTIONS FOR COMMON PROBLEMS
TECHNICAL CHARACTERISTICS
· Power supply: : 220-240 V / 50-60 Hz
· Nominal power: 1000 W
· Water tank capacity: 1800 cc
· Weight: 8,7 kg
· Materials used for the body: ABS
·
Size: Height 36,5 cm - Width 27,5 cm - Depth 29,0 cm
For the technical characteristics, refer to the data plate on the machine.
2006/42 CE – 2004/108 CE – 2006 /95 CE
For problems not covered in the above table or if the suggested solutions do not solve the problems, contact
the Lavazza customer service.
Problem Possible causes Solutions
The machine does not turn on. » Machine not connected to the
mains.
» Check the correct jack input.
The LEDs fl ash quickly.
» There is a failure. » Contact the customer service or the service
centre.
The capsule loading arm does not
reach the locking position.
» The used capsule drawer/drip
tray is full.
» Capsule inserted incorrectly.
» Empty the used capsule drawer/drip tray.
» Lift the capsule loading arm and insert cor-
rectly the capsule.
The pump does not start.
» No water in the tank. » Fill with fresh drinking water and repeat the
loading of the hydraulic circuit.
The machine does not brew coff ee.
» Capsule not inserted.
» Operating temperature not
reached.
» Capsule loading arm lifted.
» No water in the tank.
» Filter not correctly inserted.
» Insert the capsule.
» Wait until it reaches the proper temperature.
» Lower the capsule loading arm.
» Fill with fresh drinking water and repeat the
loading of the hydraulic circuit.
» Check the insertion of the Brita®
lter and
repeat the loading of the hydraulic circuit
(see instructions provided with the fi lter).
The coff ee is not hot enough.
» The coff ee cups are cold.
» A large amount of hot water was
dispensed.
» Preheat the coff ee cups by dispensing hot
water.
» Wait at least 20 seconds after dispensing
hot water.
The coff ee fl ows too quickly, no
cream forming for the espresso.
» An already used capsule was
introduced.
» Insert a new capsule.
No milk or cappuccino froth.
» The milk is not good.
» The milk is not cold enough.
» Steam dispensing wand clogged.
» Use fresh, partially skimmed milk.
» Use milk at refrigerator temperature.
» Clean the steam wand with a needle and
clean the spout.
No hot water or steam dispensing.
» Steam/hot water spout clogged.
» No water in the tank.
» Filter not correctly inserted.
» Clean the spout (see maintenance and
cleaning). If the problem persists, clean
the hole of the dispensing unit with a fi ne
needle, making sure it s not clogged, then
turn on the machine and dispense a small
amount of steam.
» Fill with fresh drinking water and repeat the
loading of the hydraulic circuit.
» Check the insertion of the Brita®
lter and
repeat the loading of the hydraulic circuit
(see instructions provided with the fi lter).
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lavazza LB 1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lavazza LB 1100 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info