646823
3
Zoom out
Zoom in
Previous page
1/92
Next page
TwinFinder
DE
03
3
Messmodus wählen
Wählen Sie METAL-Scan oder AC-Scan mit der Modus-Taste (6).
Die Modusanzeige (3) zeigt zeigt die jeweilige Betriebsart an. Aus
Sicherheitsgründen ist die Warnung vor Wechselspannung immer
aktiv. Die LED „Spannung (AC) gefunden“ (4) leuchtet, wenn sich
eine spannungsführende Leitung im Messbereich befindet.
4
Metall suchen
Wählen Sie den Modus METAL-Scan (Taste 6).
CAL-LED (3) blinkt: Die CAL-Taste (7) drücken und warten
bis die Kalibrierung abgeschlossen ist. Halten Sie das Gerät
zur Kalibrierung in die Luft, so dass es von evtl. vorhandenen
Metallobjekten entfernt ist. Auf diese Weise wird die maximale
Empfindlichkeit des Gerätes erzielt. Siehe hierzu auch Tipp 1.
CAL-LED (3) leuchtet kontinuierlich: Es kann mit der Messung
begonnen werden. Jetzt erkennt das Gerät Metalle, wie
Bewehrungseisen, Heizungsrohre und Wasserleitungen direkt
unter Putz bzw. Holzpaneelen und anderen nicht-metallischen
Verschalungen.
Das Gerät auf die Wand setzen.
Bewegen Sie das Gerät langsam über die Oberfläche.
Normalerweise misst das Gerät durch seine hohe Empfindlichkeit in
einem breiteren Einzugsbereich auf der Messoberfläche. Wollen Sie
das eigentliche Zentrum des Messobjektes bestimmen, müssen Sie
das Gerät jeweils von links und rechts auf das Objekt zubewegen.
Zwischen beiden Markierungen ist die Mitte des Metallobjektes.
Tipp 1: Um näher an das Messobjekt zu gelangen, kann die
Empfindlichkeit angepasst werden. Dazu auf der Oberfläche kalibrie-
ren und CAL-Taste (7) drücken, sobald bei der Annäherung an das
Objekt die Maximal anzeige aufleuchtet. Anschließend das Gerät wei-
ter auf das Objekt zubewegen. Diesen Vorgang so oft wiederholen,
bis das Objekt genügend eingegrenzt worden ist.
Tipp 2: Die Maximalanzeige leuchtet nicht auf, obwohl das LED-
Display reagiert. Sobald die stärkste Anzeige erfolgt, befindet sich
das Gerät über das Metallobjekt. Bringen Sie an dieser Stelle eine
Markierung an.
==
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner TwinFinder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner TwinFinder in the language / languages: All languages as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info