577505
6
Zoom out
Zoom in
Previous page
1/7
Next page
6
Innovation in Tools
GmbH & Co KG
Donnerfeld 2, D-59757 Arnsberg
Tel: 0049 2932 638-300
Fax: 0049 2932 638-333
laserliner@umarex.de
www.laserliner.com
Vertical use
VERY IMPORTANT: Before using the instrument in the vertical mode, please put the AquaPro in the
horizontal position (look to “horizontal use”), but DO NOT switch it on yet. Then the compensator
clamp (4) have to set to LOCK before preparing instrument for vertical use.
· Insert vertical adapter (6) for use without tripod.
· Fit both vertical adapter (6) and tripod adapter for use on tripod.
· Set bubble (8) by setting screw of vertical adapter (6). Please take care to set bubble very
precisely as compensator will not work in vertical mode.
· Switch the AquaPro on, remaining functions are the same as described for horizontal use.
Infra-red remote control
The keys of the remote control are identical with the keys of the instrument with the exception of the
„POWER“-key. With the „POWER“-key of the remonte control the AquaPro can only be switched-off
but not started again.
Checking accuracy
Set up the AquaPro in rotating mode and take reading on wall at distance of 10 meters.
Mark laser line on wall. Turn instrument 180° around its vertical axis and take 2
nd
reading.
Mark centre point between two readings. Deviation of both readings fom centre point should not
exceed 2 mm per 10 meters.
Take two more readings after turning instrument 90° around its vertical axis and proceed as
mentioned above.
If the unit is disadjusted please contact Umarex-Laserliner or an authorized workshop.
Laser receiver:
1 Vial 7 Battery box 12 Display
2 Display 8 Sound on/off 13 ¼” Mounting hole
3 Referece rabbet 9 Fine/coarse 14 Battery installation
4 Receiving window detection symbol
5 On/Off switch 10 Illumination on/off 15 Zero indication line
6 Buzzer 11 Magnet 16 cm-Scale
Installation of batteries:
· Open the battery compartment cover “7” by use of a coin.
· Put in two 1.5 V AA batteries according to installation symbol “14” on
backside of the laser receiver (take care of correct polarity!). Close cover.
· In order to save battery power the receiver will automatically turn off if it
has not received laser scanning signal for 5 minutes.
Universal holder with quick clamping for levelling staff:
· If required mount the laser receiver to clamp as per picture above.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner AquaPro 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner AquaPro 200 in the language / languages: English, German as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info