694703
17
Zoom out
Zoom in
Previous page
1/18
Next page
Laser 5089 Code Reader User’s Guide_ Laser 5089 Code Reader User’s Guide_
7.1 Error Message
When a “Communication Error!” message displays, please check the following:
Verify ignition key is in the ON position.
Make sure the code reader is correctly attached to vehicle’s Data Link
Connector (DLC).
Check DLC for cracked or recessed pins, or for any substance that could
prevent a good electrical connection.
Check OBDII connector for bent or broken pins.
Make sure the vehicle is OBDII/EOBD compliant.
Turn the vehicle key to OFF for 10 secs and then back to ON.
Verify battery voltage is at least 8.0V.
Verify that the control module is not defective.
7.2 Code Reader Does Not Power Up
If Laser 5089 will not power up, communicate with vehicle’s control module, or
functions incorrectly in any other way, do the following:
Check DLC for broken or bent pins and clean the pins if need be.
Make sure it is correctly connected to vehicle’s DLC.
Verify battery voltage is at least 8.0V
1. Remove battery cover with a screwdriver.
2. Remove battery and discard according to your local waste regulations.
3. Install a new 9V alkaline battery.
4. Reinstall the battery cover with the screwdriver.
7. Troubleshooting
32 33
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laser 5089 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laser 5089 in the language / languages: English as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info