685187
2
Zoom out
Zoom in
Previous page
1/2
Next page
STEP 1
Assemble the (4) legs, (2) wheels and
wheel axle to the fire pit using (12) 10MM
bolts and nuts. First, assemble the back
leg to the fire pit using (3) bolts and nuts.
Second, slide the wheels on the wheel
axle and insert one end of the axle in back
leg axle sleeve. Third, insert wheel axle in
front leg axle sleeve and assemble front
leg to fire pit using (3) bolts and nuts.
Push wheels so they are touching the axle
sleeves and insert pins in wheel axle.
Spread the stems to keep wheels in
position. Assemble the other legs to the
fire pit using (3) bolts and nuts for each
leg. Make sure all bolts are securely
tightened.
• ADDING SAND TO THE BOTTOM OF NORTHERN LIGHTS HELPS PROTECT
AGAINST THE CORROSIVE NATURE OF THE ASHES AND WILL EXTEND
THE LIFE OF THE PIT.
• BURN THE NORTHERN LIGHTS 3 TIMES BEFORE USING TO COOK ON.
• IF YOU ARE NOT GOING TO USE NORTHERN LIGHTS FOR A LONG PERIOD
OF TIME, STORE AWAY OUT OF THE WEATHER AND ELEMENTS.
• DO NOT LET THE NORTHERN LIGHTS FILL WITH WATER.
• DO NOT DUMP ASHES WHERE THEY COULD START A FIRE.
• DISPOSE OF ASHES IN PROPER RECEPTACLE ONLY AFTER ASHES HAVE
COOLED.
HELPFUL HINTS
ASSEMBLY INSTRUCTIONS:
INSTRUCCIONES DE ASAMBLEA:
PASO 1
Reúna el (4) piernas, (2) eje de ruedas y rueda
al hoyo del fuego que utiliza (12) 10 MM cerrojos
y las nueces. Primero, reúne la pierna de
espalda al hoyo del fuego que utiliza (3) cerrojos
y nueces. Segundo, desliza las ruedas en el eje
de la rueda y mete un fin del eje en atrás manga
de eje de pierna. El tercero, mete eje de rueda
en la manga anterior de eje de pierna y reúne
pierna anterior despedir utilizar de hoyo (3)
cerrojos y nueces. El empujón rueda tan ellos
tocan las mangas de pierna y meten alfileres en
el eje de la rueda. Esparza los tallos para
mantener las ruedas en la posición. Reúna las
otras piernas al hoyo del fuego que utiliza
(3) cerrojos y nueces para cada pierna.
Cerciórese todos cerrojos son apretados
firmemente.
• AGREGANDO LA ARENA AL FONDO DE LAS AYUDAS NORTHERN LIGHTS
GRANDES DEL CIELO PROTEGER CONTRA LA NATURALEZA CORROSIVA
DE LAS CENIZAS Y DE LA VOLUNTAD AMPLIAR LA VIDA DEL HOYO.
• QUÉMESE SU NORTHERN LIGHTS 3 VECES ANTES DE USAR LA PARRILLA
DE COCINAR.
• SI USTED NO VA A UTILIZAR EL NORTHERN LIGHTS POR UN PERÍODO
DE TIEMPO LARGO, COLOCADO PARA PROTERJERLO DEL TIEMPO.
• NO DEJE QUE SU NORTHERN LIGHTS SE LLENE DE AGUA.
• NO DESCARGUE LAS CENIZAS DONDE PODRÍAN COMENZAR UN FUEGO.
• DISPONGA DE LAS CENIZAS EN RECEPTÁCULO APROPIADO DESPUÉS
QUE LAS CENIZAS SE HAN APAGADO.
INDIRECTAS PROVECHOSAS PARA EL USO
PAGE 2
STEP 6
IMPORTANT! Before using you must
place 5-10 lbs of sand on the bottom of
the fire pit. The sand insulates the area
below the pit and protects against the
corrosive nature of the ashes.
STEP 2
Assemble each of the (2) side shelves to
the fire pit using (4) 10MM bolts and nuts.
Assemble the side shelf with handle
opposite the side with the wheels. Tighten
all bolts securely.
STEP 3
Assemble the (2) ring sections to the fire
pit using (6) 20MM bolts. Tighten all the
bolts securely. Next, take each of the
(4) cooking grate pins and thread them
into the nuts welded on the inside of the
fire pit. Do not over tighten!
NORTHERN LIGHTS XT FIRE PIT
Note: Since the heat intensity from the fires will vary depending on the
type and amount of fuel used, you may experience minimal peeling or
flaking of the paint. This is normal and will not affect the safety or
performance of the Northern Lights Fire Pit.
SANDPAINT FINISH:
FINAL DE LA PINTURA DE LA ARENA:
Nota: Puesto que la intensidad del calor de los fuegos variará
dependiendo del tipo y de la cantidad de combustible usados, usted
puede experimentar la peladura o formar escamas mínima de la
pintura. Esto es normal y no afectará la seguridad o el
funcionamiento del Northern Lights Fire Pit.
These custom made accessories are made
just for the Northern Lights Fire Pit.
NORTHERN LIGHTS ACCESSORIES
NORTHERN LIGHTS ACCESORIOS
Estos accesorios hechos a la medida son hechos sólo
para el Northern Lights Hoyo de Fuego.
PRICE QTY
$31.49
EACH
COVER
TOTAL
--------------------------------------------------->
To Order:
Photocopy and MAIL to:
Landmann USA
Attn: Accessories Dept.
101 Old Mill Rd
Building 300
Cartersville, GA 30120
-or-
CALL: 1-800-321-3473
-or-
FAX: 770-606-8112
-or-
ONLINE STORE:
www.landmann-usa.com
Mail order info:
Name
Street Address
City / State / Zip
Daytime Telephone
Email
(Credit and debit cards accepted only)
Charge:
EXPIRATION DATE
PRECIO CANTIDAD
CADA
TAPA
Y
STEP 4
Assemble the following parts to make the
spark guard: (1) left screen, (1) right
screen, (1) back screen, (1) screen door
and (1) front support. Use (6) 10MM
bolts and nuts to assemble. Make sure
the bolts are securely tightened. Insert
the screen door into the sleeves. The
spark guard purpose is to keep sparks
contained in the fire pit. PLEASE USE at
all times.
PRICE
PRORROGÓ
EXTENDED
SHIPPING & HANDLING
$16.00
EACH
CADA
This cover helps keep out the elements.
Esta tapa de alta calidad no deja pasar los elementos.
x
=
x
=
For each cover
Hay que incluyen cargos de envio para cada artículo comprado.
Must include shipping & handling for each item bought.
ENVÍO Y MANIPULACIÓN
Para cada cubierta
NOTE: THESE PRICES ARE GOOD THRU DECEMBER 31, 2008
PRECIO
SECURITY CODE
Ships UPS ground in lower continential 48 states, excludes Hawaii, Alaska, US Virgin Islands
and Puerto Rico. Please call for shipping quote into these excluded areas. NO COD's.
*
*
A
DO NOT RETURN PRODUCT TO THE STORE. IF YOU HAVE
QUESTIONS OR HAVE TROUBLE WITH ASSEMBLY,
PLEASE CALL 1-800-321-3473 FOR ASSISTANCE.
NO DEVOLVER EL PRODUCTO A LA TIENDA. SI USTED TIENE PREGUNTAS O TIENE
PROBLEMAS CON EL MONTAJE, POR FAVOR LLAME AL 1-800-321-3473 PARA ASAMBLEA.
G
E
F
J
H
C
B
Q
D
M
L
K
N
P
STEP 5
Place the cooking grate and assembled
spark guard on the cooking grate pins.
W
(SHOWN WITH SHELVES DOWN)
Note: Since the heat intensity from the fires will vary depending on the
type and amount of fuel used, you may experience minimal peeling or
flaking of the paint. This is normal and will not affect the safety or
performance of the Northern Lights Fire Pit.
SANDPAINT FINISH:
FINAL DE LA PINTURA DE LA ARENA:
SIDE SHELF & COOKING GRATE:
TOME PARTIDO ESTANTE & COCINANDO PARILLA:
U
PASO 2
Reúna (2) el lado arrincona al hoyo del fuego
que utiliza (4) 10 MM cerrojos y las nueces.
Reúna el estante del lado con el asidero frente
al lado con las ruedas. Apriete todos cerrojos
firmemente.
PASO 3
Reúna el (2) las secciones del anillo al hoyo del
fuego que utiliza (6) 20 MM cerrojos. Apriete
todos los cerrojos firmemente. Próximo, toma
cada uno del (4) cocinando alfileres de parilla
y los enhebra en las nueces soldadas por
dentro del hoyo de fuego. ¡Haga no sobre
aprieta!
PASO 4
Reúna las partes siguientes hacer al guardia de
la chispa: (1) dejó pantalla, (1) pantalla correcta,
(1) atrás pantalla, (1) puerta mosquitera y (1)
apoyo anterior. Utilice (6) 10 MM cerrojos y las
nueces para reunir. Cerciórese los cerrojos son
apretados firmemente. Meta la puerta mosquitera
en las mangas. El propósito del guardia de la
chispa es de mantener las chispas contenidas
en el hoyo del fuego. UTILICE POR FAVOR
siempre.
PASO 5
Coloque la parilla de la cocina y a guardia
reunido de chispa en los alfileres de parilla de
cocina.
PASO 5
¡IMPORTANTE! Antes utilizarle debe colocar
5-10 lbs de la arena en el fondo del hoyo del
fuego. La arena aísla el área debajo del hoyo
y protege contra la naturaleza corrosiva de las
cenizas.
(MOSTRADO CON ARRINCONA HACIA ABAJO)
$
Remove cooking grate
from fire pit when not
grilling.
Side shelves may be folded by first
lifting up on the shelf and then allow it
to swing down to the folded position.
Quite cocinando parilla del
hoyo del fuego cuando no
asando a la parrilla.
El lado arrincona puede ser doblado por
levantar primero en el estante y entonces lo
permite columpiar hacia abajo a la posición
doblada.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Landmann 28740 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Landmann 28740 in the language / languages: English, Spanish as an attachment in your email.

The manual is 3,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info