626352

Land Rover Range Rover - 2000 Manual

47
Zoom out
Zoom in
Previous page
1/48
Next page
Cleaning & vehicle care
177
WASHING YOUR VEHICLE
Wash your car frequently using a sponge and
generous quantities of cold or lukewarm water
containing a car shampoo. Rinse and dry off
with a chamois leather.
• Do not use hot water!
• Do not use detergent soap products or
dishwashing liquid!
When using a hose, do not direct the jet into
the heater air intake ducts, or through the
wheel trim apertures onto the brake
components, or at the door, window or
sunroof seals, where water pressure could
penetrate the seals.
WARNING
Some high pressure cleaning systems are
sufficiently powerful to penetrate door and
window seals and damage rubbing strips
and locking mechanisms. Never aim the
water jet directly at components that might
easily be damaged.
Underbody maintenance
Corrosive materials used for snow and ice
removal and dust control can collect on
underbody parts. If these materials are not
removed, accelerated rusting can occur on
underbody parts such as the frame, floor pan
and the exhaust system. Regularly flush these
materials from the underbody with plain
water. Take care to thoroughly clean any areas
where mud and other debris can collect.
Similarly, after off-road driving or wading in
muddy or salt water conditions, use a hose to
wash underbody components and other
exposed parts of the vehicle.
Steam cleaning
Before steam cleaning the engine
compartment, cover the power steering and
brake fluid reservoirs to prevent
contamination of fluid. After steam cleaning
carefully re-wax the metallic components,
especially the steering column, engine coolant
pipes, hose clips and the ignition coil clamp.
Removing tar spots
Use mineral spirit or turpentine to remove tar
spots and stubborn grease stains from the
paintwork. Then wash immediately with soapy
water to remove all traces of spirit.
Body protection
After washing, inspect the paintwork for
damage. Any stone chips, fractures or deep
scratches in the body work should be repaired
promptly. Bare metal will corrode quickly and
can develop into major repair expense. Some
exterior panels of your vehicle are made of
aluminum which will not corrode in the same
manner as sheet steel. However, any damage
should still receive prompt attention. Minor
chips and scratches can be repaired with
touch-up materials available from your dealer.
Larger areas of damage need to be corrected
to professional standards immediately.
Occasionally protect the paint surface with an
application of car polish.
NOTE: DO NOT apply car polish to the
moulded bumpers - polish will become
ingrained in the textured finish of the
mouldings.
Cast alloy road wheels
The cast alloy road wheels are covered with a
protective coating. To prevent corrosion, it is
essential that this coating is not damaged. To
clean the wheels, use a warm soapy liquid,
stubborn stains can be removed using a soft
brush.
… 47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Land Rover Range Rover - 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Land Rover Range Rover - 2000 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info