Manual Lanaform LA120122 (page 5 of 36) (English, German, Dutch, French, Polish)

719204

Zoom out

Zoom in

1/36

EN FR NL DE PL CS SL HR BG SV LT

5 / 36 ENGLISH

•

Remove the reservoir lid by its handle

(Fig. 3, point 1).

•

Fill the reservoir with clean distilled or

demineralised water up to a maximum

40°C (Fig. 3, point 2). For best humidi-

cation and product lifetime, make sure

that the water level is still between the

minimum and maximum levels shown in

the reservoir (Fig. 1-2).

• Replace the cover (Fig. 3, point 3).



PLEASE NOTE

• DO NOT ll the reservoir above the indi-

cator showing MAX lling level.

•

DO NOT pour the water into the base

through the exhaust vent (Fig. 2, point 14).

• DO NOT pour essential oils on to the pro-

jection lens (Fig. 2, point 17).

Air humidication function

•

With dry hands, insert the end of the

adapter in the DC jack socket located on

the back of the diuser (Fig. 1, point 3).

•

The humidier is tted with 3 mist in-

tensities:

Press the humidication button (Fig. 1,

point 6) once: the light is green and hu-

midication has been activated at the

lowest intensity (120 ml/hr);

Press the humidication button twice: the

light is blue and humidication has been

activated at medium intensity (150 ml/hr);

Press the humidication button three

times: the light is red and humidication

has been activated at the highest inten-

sity (180 ml/hr);

Press the humidication button four

times: the light goes out and humidi-

cation stops.

When the reservoir is empty, the light ashes

red (x) and humidication stops automa-

tically. The other functions remain active.

Use of essential oils

To diuse organic essential oils in the room,

pour a few drops of organic essential oils

(maximum -) directly into the water and

then put the lid back on the reservoir (Fig.

, point ).



WARNING

ADDITIONAL INFORMATION RELATING TO

THE USE OF ESSENTIAL OILS

• Before using essential oils, please check

the harmful eects that use of these prod-

ucts may have on your health.

• Always choose quality essential oils that

are pure, 100% natural and intended for

diusion. Use them in moderation and

with care. Follow the instructions and

warnings stated on the packaging of the

essential oils, in particular noting that:

Pregnant women, people with epilepsy,

asthmatics and people who suer from

allergies, those with heart problems

or serious illnesses should not use es-

sential oils.

Essential oils should be used only for

periods not exceeding 10 minutes in

the room of a baby (under 3 years old)

and only when the baby is not actually

in the room.

•

Make sure that children and minors do

not play with or use the device.

• Just a few drops (3 to 4 drops at most) of

essential oils are sucient to ensure that

the device works properly and the scent

is diused. Excessive use of essential oils

could damage the device.

•

Lanaform cannot be held liable in the

event of accidental damage resulting from

any use contrary to the instructions given

in this manual.

Nightlight function

• Press the nightlight button (Fig. 1, point

12) once: the light switches on and the

nightlight mode is active;

•

Press the nightlight button twice: the light

switches o and the nightlight mode is

disabled.

Light projection function

• Press the projection button (Fig. 1, point

5) once: the light is blue and the active

light projection active for a period of 20

minutes;

•

Press the projection button twice: the

light is green and the light projection is

active continuously;

• Press the projection button three times:

the light goes out and the light projection

is disabled.



PLEASE NOTE: EVEN THOUGH

THERE IS A SAFETY DEVICE THAT

STOPS THE TRANSDUCER FROM

WORKING, DO NOT LEAVE THE DE-

VICE CONNECTED WHEN YOU ARE

NOT USING IT.

MAINTENANCE AND STORAGE

Always switch o the humidier and empty

the water in the reservoir before cleaning

or storing it.

If the water is hard, i.e. if it contains too much

calcium and magnesium, it may leave a “white

powder” in the device and cause frothing on

the surface of the basin, on the transducer

(ceramic pellets producing ultrasound) and

on the internal walls of the water reservoir.

Frothing on the surface of the transducer

means that the device will not work properly.

We recommend:

1 Using water that has been boiled

and cooled or distilled water

each time the device is used,

2 Cleaning the reservoir every 3 days and

cleaning the transducer every week,

3 Changing the water in the reservoir

regularly so that it stays fresh, and not

leaving it there for longer than 2 days,

4 Cleaning the entire device and

making sure that all its parts are

completely dry when it is not in use.

To clean the transducer:

1 Turn the mist conductor (Fig. 1,

point 9) anti-clockwise until the

release markings are aligned,

then remove the conductor

2 Place 2 to 5 drops of vinegar on its

surface and leave for 2 to 5 minutes.

3 Brush the foam o the surface

with a soft brush. Do not use a

hard tool to scrape the surface.

4 Rinse the transducer with clean water.

5 Do not use soap or other basic

substances to clean the transducer.

To clean the basin:

1 Clean the basin with water using a soft

cloth and vinegar if there are foam

OR limescale deposits on the inside.

2 If the foam covers the safety

switch, put a few drops of vinegar

on it and clean it with a brush.

3 Rinse the basin in clean water.

STORAGE:

1 Clean and dry the humidier care-

fully using ultrasound, following

the maintenance instructions.

2 Let it dry completely before

storing it. Do not store it if there

is still water in the base.

3 Store the device in a dry, cool place

out of the reach of children.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lanaform LA120122 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lanaform LA120122 Manual

Product: