680736
3
Zoom out
Zoom in
Previous page
1/14
Next page
22
2. Insert batteries, observing the correct polarity (see marking).
3. Replace the compartment cover.
Note: Always wait for 2 minutes after removing the batteries
before reinserting, otherwise start up and transmission problems
may occur. In the event of changing batteries in any of the units, all
units need to be reset by following the setting up procedures.
BATTERY CHANGE
It is recommended to replace the batteries in all units regularly to ensure optimum accuracy of these units (see
Specifications”).
Please participate in the preservation of the environment. Return used batteries to an
authorized depot.
SETTING UP
Note: This weather station receives only one outdoor transmitter.
1. First, insert the batteries in the transmitter (see “How to install and replace batteries in the thermo-
hygro transmitter”).
2. Within 30 seconds of powering up the transmitter, insert batteries in the weather station (see “How to
install and replace batteries in the weather station”). Once the batteries are in place, all segments of
the LCD screen will light up briefly and a short signal tone will sound. Then the indoor temperature,
humidity and the time as 0:00 will be displayed. If these information are not displayed on the LCD screen
after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them. Once the
indoor data is displayed user may proceed to the next step.
3. After the batteries are inserted, the weather station will start receiving data signal from the transmitter. The
outdoor temperature and humidity data should then be displayed on the weather station. If this does not
happen after 2 minutes, the batteries will need to be removed from both units and reset from step 1.
4. In order to ensure successful 868 MHz transmission, the distance between the weather station and the
transmitter should be within 100 meters (see notes on “Positioning” and “868 MHz Reception”).
FUNCTION KEYS
Weather station:
The weather station has five easy to use function keys:
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Crosse WS9257 IT plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Crosse WS9257 IT plus in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info