672508
3
Zoom out
Zoom in
Previous page
1/6
Next page
9
Outdoor Reception
Signal icon*
MIN/MAX Outdoor
temperature
SET key
Press and hold for about 3 seconds to enter the Manual setting mode.
+ key
Press to make adjustment in the setting mode.
Press and hold to reset all MIN/MAX records
LCD SCREEN AND SETTINGS:
Time
Indoor Temperature
in °F/°C
Outdoor Temperature
in °F/°C
Temperature icon
(Weather Girl icon)
Low battery indicato
r
(temperature station)
Low battery indicato
r
(
transmitter
)
10
* When the signal from the transmitter is successfully received by the Temperature Station, this icon
will be switched on. (If not successful, the icon will not be shown on the LCD). User can therefore
easily see whether the last reception was successful (“ON” icon) or not (“OFF” icon). On the other
hand, the short blinking of the icon shows that a reception is being done at that time.
For a better display clarity, the LCD screen is split into 3 sections.
Section 1 - TIME
Display of time (manually set).
Section 2 - INDOOR TEMPERATURE
Display of indoor temperature.
Section 3 - CURRENT OUTDOOR TEMPERATURE AND MIN/MAX OUTDOOR TEMPERATURE
AND WEATHER GIRL ICON
Display the current temperature.
Display the outdoor minimum and maximum temperature.
Display of the current temperature condition on the right side of the LCD in form of one of the
five weather icons (featured by Weather Girl) which change their appearance depending on the
current outdoor temperature.
MANUAL SETTING:
In normal display, press and hold the SET key for 3 seconds to enter the manual setting mode.
11
Flashing
Flashing
F/C TEMPERATURE UNIT SETTING
The temperature can be set in F (degree Fahrenheit) or C (degree Celsius); default setting in F:
1. Press and hold the SET key in the normal display for about 3 seconds, the digit "F" will be
flashing.
2. Press the + key to select the unit as F or C.
3. Confirm by pressing the SET key to enter the 12/24 hour time display setting.
Note:
If no buttons are pressed within approximately 8 seconds while in any setting option, the unit will return
to normal operating mode.
12 / 24- HOUR TIME DISPLAY SETTING
The time format can be set in 12-hour or 24-hour mode (default setting “12”):
12
Minutes (flashing)
Hour (flashing)
1. The "12" or "24" digit will be flashing.
2. Press the + key to set the desired time display mode.
3. Press shortly the SET key to advance to the MANUAL TIME SETTING.
Note:
If no buttons are pressed within approximately 8 seconds while in any setting option, the unit will return
to normal operating mode.
MANUAL TIME SETTING
To manually set the time of the Temperature Station:
1. The hour digit of the time display will be flashing.
2. Press the + key to adjust the hour (press and hold to allow fast advance). Press SET key to
confirm and go to the minute setting.
3. The minute digit will be flashing. Press the + key to adjust the minute (press and hold to allow
fast advance). Press SET key once more to return to normal display.
Note:
If no buttons are pressed within approximately 8 seconds while in any setting option, the unit will return
to normal operating mode.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Crosse WS-9760U-IT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Crosse WS-9760U-IT in the language / languages: English as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info