647696
2
Zoom out
Zoom in
Previous page
1/6
Next page
5
light up briefly. Following the time as 12:00 and the weather icon will be
displayed. If these are not displayed after 60 seconds, remove the
batteries and wait for at least 10 seconds before reinserting them.
3. After inserting the batteries, the Weather station will start receiving data
from the transmitter. The outdoor temperature and the signal reception
icon should then be displayed on the Weather station. If this does not
happen after 3 minutes, the batteries will need to be removed from both
units and reset from step 1.
4. In order to ensure sufficient 915 MHz transmission however, this should
under good conditions be a distance no more than 100 meters (330
feet) between the final position of the Weather Station and the
transmitter (see notes on “Mounting” and “915 MHz Reception”).
HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE
STATION
The Weather Station uses 3 x AA, IEC LR6, 1.5V batteries. When batteries
will need to be replaced, the
low battery icon will appear on
the LCD. To install and replace
the batteries, please follow the
steps below:
1. Lift up the battery
compartment cover.
2. Insert batteries observing
the correct polarity (see
marking).
3. Replace compartment
cover.
6
HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE
TRANSMITTER
The Temperature Transmitter uses 2 x AA, IEC LR6,
1.5V battery. To install and replace the batteries,
please follow the steps below:
1. Remove the battery compartment cover at the
back of the transmitter.
2. Insert the batteries, observing the correct polarity
(see marking).
3. Replace the battery compartment cover on the
unit.
Note:
In the event of changing batteries in any of the units, all units need to be reset
by following the setting up procedures. This is because a security code is
assigned by the transmitter at start-up and this code must be received and
stored by the Weather station in the first 3 minutes of power being supplied to
it.
BATTERY CHANGE:
It is recommended to replace the batteries in all units regularly to ensure
optimum accuracy of these units (Battery life See Specifications below).
Please participate in the preservation of the environment.
Return used batteries to an authorized depot.
FUNCTION KEYS:
Weather station:
The weather station has four easy to use function keys.
7
SET key
Press the key to enter manual setting modes: time, 12/24 hour time
display, and temperature unit (ºC/ºF) setting
Stop the alarm
+ key
To make adjustment for various settings
Stop the alarm
ALARM key
Enter the alarm setting mode
Switch the alarm ON/ OFF
Stop the alarm
MIN/MAX RESET key
Press and hold to reset the MIN/MAX temperature records
Activate the snooze
Exit manual setting modes
SET ke
y
MIN/MAX RESET key
A
LARM key
+ ke
y
8
Outdoor
Reception
Signal icon*
MIN/MAX indoo
r
temperature
MIN/MAX outdoor
temperature
LCD SCREEN AND SETTINGS:
* When the outdoor signal is successfully received by the Weather Station,
this icon will be switched on. (If not successful, the icon will not be shown in
LCD) So user can easily see whether the last reception was successful (icon
on) or not (icon off).
For a better display clarity, the LCD screen is split into 3 sections.
Section 1 - TIME AND ALARM
Display of time
Time
Indoo
r
Temperature
in °C/ °F
Outdoor
Temperature
in °C/ °F
Weathe
r
tendenc
y
indicato
r
Weather
forecast icon
Low batter
y
indicato
r
(weathe
r
station)
Low battery
indicator
(transmitter)
Alarm icon
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Crosse WS-9133U-IT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Crosse WS-9133U-IT in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info