606452
5
Zoom out
Zoom in
Previous page
1/26
Next page
32
icons, and air pressure value. "- - -" will be shown for outdoor
data.
5. Afterwards, the Weather Station will start receiving data from
the transmitters. The outdoor temperature, humidity windchill
and wind speed should then be displayed on the Weather
Station. If this does not happen after 45 seconds, the
batteries will need to be removed from both units. You will
have to start again from step 2.
6. The transmitter reception icon is now blinking again to
indicate that the station is trying to receive the rain sensor
data. It will stop blinking once the rain sensor has been
detected. If this doesn’t happen after 45s, you need to start
again from step 2.
Note: if no thermo-hygro transmitter is detected, the weather
station will display the message "THERMO TX OUT OF
RANGE“; if no rain sensor has been detected, the message
"RAIN TX OUT OF RANGE“ will be display in the text section
(last two lines on the LCD).
7. You may then check all cables for correct connection and all
components for correct function by manually turning the
wind-gauge, moving the weather-vane, tilting the rain sensor
to hear the impact of the internally moving seesaw, etc (See
Placement below).
8. After the Weather Station has been checked for correct
function with regard to the above points and found fit, the
initial set up of the weather station system is finished and the
mounting of the system components can take place. It must
be ensured however that all components work properly
together at their chosen mounting or standing locations. If
e.g. there appear to be problems with the 868 MHz radio
transmission, they can mostly be overcome by slightly
changing the mounting locations.
Note:
The radio communication between the receiver and the
transmitter in the open field reaches distances of max 100
metres, provided there are no interfering obstacles such as
buildings, trees, vehicles, high voltage lines, etc.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for La Crosse WS-3650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of La Crosse WS-3650 in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info