Manual Kyocera KM2530 (page 15 of 146) (English)

17462

Zoom out

Zoom in

1/146

CHAPTER 2 NAMES OF PARTS

2-3

1 [Start] key (Indicator)

(When the indicator is lit green, press to start copying.)

2 [Stop/Clear] key

(Press to stop copying or to change the number of copies to

be made.)

3 [Reset] key

(See the “Initial mode” on this page.)

4 [Energy Saver] (preheat) key

(Press to select the energy saver mode. Press again to cancel

the energy saver mode.)

5 [Interrupt] key (Indicator)

(Press to interrupt copying. The indicator will light when the

key is pressed. See page 4-7.)

6 [Management] key

(While the copy management mode is ON, press to enter the

department code after copying is finished.)

7 [

] (Default) key

(Press to change the default settings as appropriate to your

desired copying conditions.)

8 Numeric keys

(Press to set the number of copies or enter a desired value.)

9 Touch panel

(Displays messages on how to operate the copier as well as

trouble. Each function key is also displayed.)

0 [Auto Selection] key (Indicator)

(Press to select the auto selection mode. The indicator is lit

while the auto selection mode is ON. Optional Document Pro-

cessor or Duplex Document Processor is required for this func-

tion. See page 5-22.)

A [Facsimile Priority Output] key (Indicator)

(Press to select the fax priority output mode. The indicator is lit

when the fax priority mode is available. For detailed informa-

tion, refer to the operation guide for the optional fax kit.)

B [Printer Priority Output] key (Indicator)

(Press to select the printer priority output mode. The indicator

is lit when the printer priority mode is available. For detailed

information, refer to the operation guide for the optional printer

board or printer/scanner kit.)

C Brightness adjustment control dial

(Turn this dial when you want to adjust the brightness of the

touch panel.)

D [Copier] key (Indicator)

(Press to use the copier functions. The indicator lights or blinks

green or orange according to the state of the machine.)

E [Printer] key (Indicator)

(Press to use the optional printer functions. The indicator lights

or blinks green or orange according to the state of the ma-

chine.)

F [Scanner] key (Indicator)

(Press to use the optional scanner functions. The indicator

lights or blinks green or orange according to the state of the

machine.)

G [Fax] key (Indicator)

(Press to switch to the fax mode when using the optional fax

function. The indicator will light while the copier is in the fax

mode.)

•

Initial mode (at the end of warm-up or when the Reset key

is pressed)

In the initial mode, paper of the same size as the original is se-

lected automatically (“auto paper selection mode”), the number

of copies is set to “1” and copy quality is set to “Text + Photo”.

NOTE

• It is also possible to change the default setting for copy expo-

sure adjustment to “auto exposure mode” in the initial mode.

(See “Exposure mode” on page 6-25.)

•

Auto clear function

A specified time (about 10 to 270 seconds) after copying stops,

the copier will automatically return to the same settings as those

after warm up. (However, the exposure mode and image quality

will not change.) Copying can be performed at the same settings

(copy mode, number of copies and exposure mode) if copying is

started before the auto clear function operates.

•

Automatic drawer switching function

If two drawers contain paper of the same size in the same orien-

tation and the paper in one drawer runs out during copying, this

function switches paper feed from the empty drawer to the full

drawer.

NOTE

• The automatic drawer switching function can be disabled. (See

“Auto casette switching ON/OFF” on page 6-13.)

Start

Stop/

Clear

Reset

Interrupt

1 2 3

4 5 6

7 8 9

Management Energy Saver

Copier

Printer

Scanner

Fax

Printer

Priority Output

Facsimile

Priority Output

Auto Selection

19GF 8 2 3

45670ABCDE

(2) Operation panel

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera KM2530 in the language / languages: English as an attachment in your email.

The manual is 11,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kyocera KM2530

Kyocera KM2530 User Manual - Dutch - 72 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kyocera KM2530 Manual

Product: