522402
62
Zoom out
Zoom in
Previous page
1/65
Next page
TracVision M3/M2 User’s Guide
71
Appendix C - Programming User-Defined Satellites
Programming Your User-Defined Satellites
To configure a user-defined satellite, you will need to program into the
antenna the following information about the satellite:
Satellite name
Satellite longitudinal position
Transponder information for all four combinations of
polarization and band (vertical high, vertical low,
horizontal high, and horizontal low):
•Frequency
•Symbol rate
FEC code
Network ID
Decoder type
NOTE: You can find this information on the web at www.lyngsat.com or
www.satcodx.com (neither website is affiliated with KVH).
To program this information into the antenna, enter the following
commands via Windows HyperTerminal (see “Connecting a Laptop to
the Antenna” on page 69).
1. Type HALT then press Enter.
2. Type the following SATCONFIG command then press
Enter:
SATCONFIG,X,A,B,C,D
3. Type @DEBUGON then press Enter.
Field Description
X User-defined satellite stored in antenna library
(996W = User A; 997W = User B)
A Longitude (0-180)
B E (East) or W (West)
C Decoding type (1 = DSS-A, 2 = DSS-B, 3 = DVB)
D Polarization (L = linear)
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KVH TracVision M3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KVH TracVision M3 in the language / languages: English as an attachment in your email.

The manual is 4,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of KVH TracVision M3

KVH TracVision M3 Installation Guide - English - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info