Installation instructions
Before installation
Check that the input voltage indicated on the characteristics
plate is the same as the voltage of the power outlet you are
going to use.
Open the oven door and take out all the accessories and
remove the packing material.
Warning! The front surface of the oven may be covered in a
protective film. Before using the oven for the first time,
carefully remove this film, starting on the inside.
Make sure that the oven is not damaged in any way. Check
that the oven door closes correctly and that the interior of the
door and the front of the oven opening are not damaged. If
you find any damage contact our Customer Care Centre on
the number supplied on the back cover of this handbook.
DO NOT USE THE OVEN if the power cable or the plug is
damaged, if the oven does not function correctly or if it has
been damaged or dropped. Contact our Customer Care
Centre on the number supplied on the back cover of this
handbook.
Put the oven on a flat and stable surface. The oven must not
be installed close to any sources of heat, radios or
televisions.
During installation, make sure that the power cable does not
come into contact with any moisture or objects with sharp
edges and the back of the oven. High temperatures can
damage the cable.
Warning: after the oven is installed you must make sure you
can access the plug.
After installation
The oven is equipped with a power cable and a plug for
single phase (household) current, 230-240V ~ 50Hz.
If the oven is to be installed on a permanent basis it must be
installed by a qualified technician. In such a case, the oven
should be connected to a circuit with an all-pole circuit
breaker with a minimum separation of 3 mm between
contacts.
WARNING: THE OVEN MUST BE EARTHED.
The manufacturer and retailers do not accept responsibility
for any damage that may be caused to persons, animals or
property if these installation instructions are not observed.
The oven only functions when the door is closed correctly.
Before the first use, clean the inside of the oven and the
accessories, following the cleaning instructions given in the
“Oven cleaning” section.
During installation, follow the instructions supplied separately.
